Overview
The Auto Ventshade Bugflector II is a high-profile, full-wrap stone and bug deflector for the 1997–2004 Dodge Dakota and the 1998–2003 Dodge Durango, part number AVS26712. It is designed to deflect road stones and insects so they strike the shield instead of the hood, fenders and windshield.
The shield is custom molded from impact-modified acrylic and sits off the hood surface, which makes the hood easier to clean around its edges. It is car-wash safe and carries a limited lifetime warranty. It attaches with 3M automotive-grade adhesive foam tape or mechanical fasteners and installs without drilling.
Key features
- High-profile, full-wrap design that covers the front of the hood.
- Off-the-hood mounting that keeps cleaning under the shield simple.
- Impact-modified acrylic in a dark smoke finish; a chrome hood shield option is also mentioned for this line.
- Custom molded with precision engineering for the listed Dakota and Durango applications.
- Attaches with 3M automotive-grade adhesive foam tape or mechanical fasteners, no drilling required.
- Car-wash safe, with a limited lifetime warranty.
Adhesive or fastener mounting
Mounting method shapes how a stone and bug deflector behaves over years of use. Adhesive foam tape creates a no-drill attachment that keeps the hood free of holes, but it depends on a clean, dry surface and an even press. Mechanical fasteners hold the shield more firmly at the mounting points, though they require accurate placement to avoid rubbing the paint.
Before mounting, wash and dry the hood, then wipe the contact areas with a mild cleaner that leaves no residue. Let the surface reach room temperature, because cold metal can prevent tape from bonding well. Dry-fit the shield first, mark the spots, and only then peel the backing. Once it is set, avoid pressing hard on the edges for a day.
Full-wrap shields also lift air over the windshield edge, so check that the shield sits level and does not contact the wipers or the hood latch. Recheck adhesive bonds after the first car wash and after long highway runs. Tightening mechanical fasteners a little after the first few drives is often needed.
- Clean hood contact areas thoroughly
- Dry-fit before peeling backing
- Check clearance at the hood latch
Specifications
| Brand | Auto Ventshade |
|---|---|
| Part number | AVS26712 |
| Style | High-profile full-wrap hood shield (Bugflector II) |
| Material | Impact-modified acrylic |
| Finish | Dark smoke |
| Mounting | No-drill; 3M automotive-grade adhesive foam tape or mechanical fasteners |
| Warranty | Limited lifetime |
| Origin | Made in the US |
Vehicle fitment
Listed fitment for this part covers the 1997–2004 Dodge Dakota (Base, R/T, SLT, SLT Plus, SXT, Sport, Sport Plus) and the 1998–2003 Dodge Durango (Base, R/T, SLT, SLT Plus, SXT, Sport). Both are direct-fit applications.
Dakota model years outside 1997–2004 and Durango model years outside 1998–2003 are not covered, and no other Dodge models are listed. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Choose the attachment method before you begin. Adhesive foam tape is the no-drill route the product is built around, while mechanical fasteners are the alternative Auto Ventshade names.
What’s included
The installation adhesive named for this shield is 3M automotive-grade foam tape. No other hardware is named, so check the package contents when the shield arrives.









