Select your vehicle

Warrior Dana 35 Rock Crawler Differential Guard – 7035

Warrior

Shop Warrior Differential Guards on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Warrior Dana 35 rock crawler differential guard, part number 7035
  • Powder-coated hammertone gray finish
  • Rear axle location, Dana 35 axle type

Description

Overview

The Warrior 7035 is a rock crawler differential guard for the Dana 35 rear axle. It fits over the factory differential plate and is intended to protect the differential from rocks, stumps and other trail hazards.

The guard is sized for a specific Dana 35 rear axle, so match that axle to your vehicle before ordering.

Key features

  • Fits over the factory differential plate
  • Powder-coated in hammertone gray
  • Intended for trail impacts from rocks and stumps
  • Designed for a Dana 35 rear axle

Trail protection for Dana 35

A differential guard covers the lowest point of the rear axle, where rocks and stumps tend to hit on rough trails. The factory plate protects the cover, but a guard over it spreads impact and helps keep the housing intact after a hard hit.

Fit comes first. Mount the guard over the factory plate, check that it clears the brake lines and driveshaft, and confirm nothing rubs during articulation. Guards add some weight, so a trail rig with a heavy front end may need extra attention to balance.

Check the mounting points and fasteners after the first few trail runs, since hard use can loosen them. Look for dents, cracks or cover damage underneath, and touch up the powder coat to slow rust at scratches.

  • Test clearance by turning the wheels
  • Inspect fasteners after rough trails
  • Touch up scratches in the powder coat
  • Check the rear cover for leaks

Specifications

Brand Warrior
Part number 7035
UPC 63414607035
Axle location Rear
Axle type Dana 35
Finish Powder-coated hammertone gray

Vehicle fitment

The stated axle is a rear Dana 35. No vehicle model or years are listed, so the axle type is the fitment detail to check.

Front axles and other Dana sizes are not covered by the stated axle. Confirm your vehicle’s year, model and trim before ordering.

What’s included

Sort the arriving parts against your install plan before starting.

SKU: W/I7035 Category:

Specification

Shipping weight 3.00 lbs
Package dimensions 12.00 × 6.00 × 6.00 in
brands

Questions & Answers

What is the Warrior 7035?

The Warrior 7035 is a Dana 35 rock crawler differential guard. It fits over the factory differential plate and is powder-coated in a hammertone gray finish. The brand is Warrior and the part number is 7035.

Is the Warrior 7035 for a front axle?

No. It is a rear guard for the Dana 35 axle, so front axles and other axle sizes do not apply to this part number.

Does it fit my Jeep?

The guard is matched by axle type, so the Dana 35 rear axle is the key check. Make sure the fit lines up with your vehicle's year, model and trim before ordering, and measure the factory differential plate to be sure.

Does a differential guard need to come off for gear service?

Often, yes. Service on the cover or carrier usually requires the guard to come off first, so plan for removing and refitting it. Reinstall with fresh hardware if the old fasteners look worn or stretched.

Can I paint the guard to match my rig?

Yes, but the powder coat is a protective finish. Scuff the surface and use a paint suited to metal before applying. Paint adds a layer that can chip under trail impacts, so touch-ups may be needed over time.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Warrior Differential Guards on Amazon