Overview
The Rock Slide Engineering AX-DG-300-D44 is a natural finish steel differential guard for a rear Dana 44 axle.
The guard is made of steel with a natural finish and standard oil capacity. Rock Slide Engineering designs and manufactures its products at its headquarters in Logan, UT, using modern manufacturing technologies.
Key features
- Steel differential guard
- For a rear Dana 44 axle
- Natural finish
- Standard oil capacity
Axle guard upkeep
A differential guard shields the axle housing and differential cover from rocks and stumps on the trail. It is a sacrificial layer, so dents and scrapes on the guard are expected after hard use, while the axle housing underneath stays protected. Steel guards can be straightened or touched up, but deep bends should prompt a check of the mounting bolts and the cover beneath.
Differential fluid matters as much as the guard. Check the fluid level and condition at the intervals your vehicle service requires, and watch for leaks at the cover gasket after the guard is installed. Look for rust at the mounts and bolts, and replace corroded hardware with new fasteners of the same type. Keep ground clearance in mind when adding any guard, since lower parts strike obstacles first.
- Check the cover gasket for leaks after install
- Inspect mounts for rust each season
- Recheck fluid level after the first drives
Specifications
| Brand | Rock Slide Engineering |
|---|---|
| Part number | AX-DG-300-D44 |
| UPC | 700007614701 |
| Product type | Differential guard |
| Axle type | Dana 44 |
| Axle location | Rear |
| Axle manufacturer | Dana |
| Material | Steel |
| Finish | Natural |
| Oil capacity | Standard capacity |
| Fit type | It has a universal fit. |
Vehicle fitment
It is for a rear Dana 44 axle, so check that your axle matches and that the guard suits your vehicle before ordering.
An axle name alone does not confirm which vehicles the guard suits. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Axle, transfer case and driveline work calls for professional installation. Use the correct fluids, torque fasteners to specification, and re-check fasteners and fluid levels after the first miles of driving. Check ground clearance and make sure the guard does not interfere with suspension links or the driveshaft.
















