Overview
The Warn M15000 is a 15000 lb self-recovery winch, part number 478022, built to pull heavy trucks out of tough situations. It is rated at 15,000 lb. (6804 kgs.) single-line pull and is a CE model with a 24V DC motor.
The M15000 uses high-strength carrier plates to handle the stresses of a 15,000 lb. pull, a smooth and durable 3-stage planetary geartrain, and a control pack designed with clearance and easy access. It suits owners of large trucks who need recovery power, and it comes set up with 90′ of 7/16 wire rope and a large hook with clasp.
Key features
- 15,000 lb. single-line rated pull (6804 kgs.)
- High-strength carrier plates for heavy loads
- 3-stage planetary geartrain with a 315:1 gear ratio
- Rotating ring gear clutch for free spooling
- Automatic direct drive cone brake
- Roller fairlead and 90′ of 7/16 diameter wire rope with hook and clasp
- Argent Gray powder coat finish
Mounting for heavy loads
A winch rated for a pull this large puts significant force into whatever it is bolted to. The mounting point should be a structural member, not a thin bumper skin or a bracket built for a lighter unit. Check the bolt pattern, the bolt grade and the condition of the frame before tightening, and recheck the fasteners after the first few hard pulls.
Heavy trucks often carry a heavier battery load, so think about the whole electrical system. Use fused leads, keep the connections clean and make sure the alternator can keep up when the winch runs for long periods. Look for scorched insulation or hot connectors after a long pull, since those signs point to undersized wiring.
- Confirm the frame is rated for the pull load
- Recheck mounting bolts after hard pulls
- Inspect leads and connectors for heat damage
Specifications
| Brand | Warn |
|---|---|
| Part number | 478022 |
| UPC | 1274848022 |
| Model | M15000 |
| Rated line pull | 15000 lbs. (6804 kgs.) single-line |
| Motor | 24V 2.5 hp Series Wound |
| Gear ratio | 315:1 |
| Geartrain | 3-Stage Planetary |
| Clutch (free spooling) | Rotating Ring Gear |
| Brake | Automatic Direct Drive Cone |
| Drum diameter/length | 3.5/8.2 (9cm/21cm) |
| Weight (as listed) | 136lbs. (62kgs.) |
| Wire rope | 90′, 7/16 diameter (27m, 11mm diam.) |
| Fairlead | Roller |
| Remote control | Remote, 12′ (3.7m) lead |
| Recommended battery | 650 CCA minimum for winching |
| Battery leads | 2 gauge, 72 (1.83m) |
| Lubrication | Molylube or Aeroshell gear lubricant |
| Finish | Argent Gray Powder Coat |
Vehicle fitment
The M15000 is a universal fit winch. Mounting and battery needs depend on the truck, so check mounting requirements before choosing a setup.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mount the M15000 to a frame or bumper structure rated for a 15,000 lb. pull, and power it from a battery that meets the 650 CCA minimum. Run the 2 gauge, 72 in (1.83m) battery leads through a fuse or breaker sized for the motor. Keep hands and clothing away from the rope and hook under load.
What’s included
The winch comes with 90′ of 7/16 diameter wire rope and a large hook with clasp, plus a roller fairlead and a remote with a 12′ (3.7m) lead.
Not included: A battery, battery leads and mounting hardware are not part of the package, so plan to source them separately.
