Overview
The Warn VR8 GEN II is an electric winch, part number 96800, rated for 8000 lbs of line pull with a 12V motor and 216:1 gear ratio. It has updated styling and upgraded performance in the VR line.
It uses a convertible control pack for upright or low-profile mounting, a waterproof Albright contactor and a one-piece tie plate in place of multiple tie bars. The cone brake is designed to hold the full-rated load. No vehicle is named for this winch.
Key features
- Convertible control pack for upright or low-profile mounting
- Waterproof Albright contactor for winch control
- One-piece tie plate in place of multiple tie bars
- Cone brake that Warn says holds the full-rated load
- Fast no-load line speed in the VR family
- Remote switch with 12 ft. lead
Wiring and rope inspection
The electrical feed sets how well a winch performs under load. Use battery cable sized for high current, a solenoid rated for the motor, and a fuse close to the battery, and keep all connections clean and tight. Voltage drop from a long or thin feed causes sluggish pulls and heat, so route wiring away from moving parts and exhaust.
Wire cable should be inspected before each use. Look for kinks, flattened sections, broken wires and rust, and replace cable that shows damage. Keep the cable spooled evenly and avoid winching at sharp angles. Check the hook and clutch periodically, and make sure the remote switch lead is not pinched by the cable.
- Check connections and fuse each season
- Inspect cable after every recovery
Specifications
| Brand | Warn |
|---|---|
| Part number | 96800 |
| UPC | 12748968009 |
| Rated line pull | 8000 lbs |
| Motor | 12V |
| Gear ratio | 216:1 |
| Type of winch | Electric |
| Remote control | Remote switch, 12 ft. lead |
| Wire rope | 94 ft. of 5/16 wire cable |
| Fairlead | Hawse or roller |
Vehicle fitment
Universal fit applies, with no vehicle, year, model or trim named. Check mounting, clearance and electrical requirements against your vehicle before ordering.
A winch mounts to a specific vehicle’s bumper or frame, so confirm the mounting fit for your vehicle. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Electric winches draw heavy current at 12V, so battery cable size, solenoid and fuse should match the wiring setup. Keep hands and body clear of the cable and fairlead while the winch is under load.
What’s included
The winch comes with 94 ft. of 5/16 wire cable and a remote switch with a 12 ft. lead.
Not included: Plan mounting hardware and wiring separately before the install.









