Overview
The Warn Vantage 4000 is a 4,000 lb rated 12V winch, part number 89040, made for side-by-side and ATV owners who need dependable pulling power. It pairs a 1.4 HP permanent magnet motor with a three-stage planetary gear train at 180:1 and carries 55 ft of wire rope.
The motor and drive train are fully sealed against the elements. The gear housing is high-strength composite with all-metal gears, and the grey powder coat finish comes with a limited 5 year warranty.
Key features
- Fully sealed motor and drive train
- Three-stage planetary gear train for smooth, efficient operation
- High-strength composite gear housing with all-metal gears
- Roller fairlead with 55 ft of wire rope
- Dash mounted rocker control, with corded remote and mini-rocker options listed
Mounting and wiring
A side-by-side winch lives in a hard environment, with mud, water and vibration. Mount it on a solid plate, keep fasteners torqued, and check them after the first few trail runs. Dash-mounted controls need a clear spot where the operator can reach the rocker without leaning across the belt line.
Route power leads away from moving suspension parts and sharp body edges, and protect them with loom where they pass through a firewall or dash. Keep the rocker wiring separate from high-current runs to reduce noise and avoid chafing. Check the lubrication schedule before the first season of use, since the drive components do the most work in deep mud.
- Torque mounting fasteners and recheck after early use
- Use loom where leads pass through panels
- Keep the rocker away from belts and linkage
Specifications
| Brand | Warn |
|---|---|
| Part number | 89040 |
| UPC | 12748890409 |
| Rated line pull | 4,000 lbs |
| Winch motor | 1.4 HP permanent magnet |
| Voltage | 12V |
| Control | Dash mounted rocker |
| Gear train | 3-stage planetary |
| Gear reduction ratio | 180:1 |
| Braking action | Spring |
| Drum size | 2.25 in diameter x 4.7 in length |
| Cable | 7/32 in x 55 ft |
| Fairlead | Roller |
| Winch type | ATV and UTV |
| Overall dimensions (L x W x H) | 14.57 in x 4.53 in x 4.69 in |
| Weight | 17.5 (unit not stated) |
| Finish | Grey powder coat |
| Warranty | Limited 5 yr |
Vehicle fitment
It is built for side-by-side and ATV use rather than a single vehicle. Match the mounting points on your machine to the winch before drilling anything.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Run the power leads to the battery with heavy-gauge wire, since the motor draws substantial current under load. Choose the location for the dash mounted rocker before routing the wiring through the cab.
What’s included
The winch is built around a dash mounted rocker control. Check the package contents on arrival to confirm the control set and any other included parts.









