Overview
The Warn Power Disconnect Cable, part number 65529, is a 41 inch winch replacement cable. It is a universal fit and is not tied to a specific vehicle.
Warn says replacement parts for its truck and Jeep winches are matched by the winch model number, battery voltage and serial number. On planetary gear models the serial number is on the gear end housing, and on upright, spur gear models such as the M8274 it is on the top of the winch housing.
Key features
- 41 inch power disconnect cable
- Winch replacement part from Warn
- Universal Fit label, with no vehicles listed
- Winch model number, battery voltage and serial number identify the right Warn part
Winch power wiring basics
A winch power disconnect cable carries full battery current to the winch, so it is part of the high-current circuit and not a light accessory. Keep the battery disconnected during any work on connections. Route the cable away from heat sources, moving suspension parts and sharp edges, and use grommets wherever it passes through sheet metal.
Check the cable ends for corrosion, loose crimps and cracked insulation at each service interval. A poor connection heats up under load and can cause slow winching or intermittent operation. Clean terminals with a wire brush and coat them with dielectric grease before reassembly.
Match any replacement to the winch’s voltage and current rating. Protective fusing belongs close to the battery, and the fuse should be sized to the winch’s stall current rather than to the cable. If the cable has been pinched, melted or overheated, replace it instead of repairing the insulation.
- Disconnect the battery before any connection work
- Keep the cable clear of heat and moving parts
- Clean and grease terminals at each service
Specifications
| Brand | Warn |
|---|---|
| Part number | 65529 |
| UPC | 12748655299 |
| Product type | Winch power disconnect cable |
| Length | 41 inches |
| Category | Winch and winch accessories |
| Fitment label | Universal Fit |
Vehicle fitment
The Warn 65529 cable is a universal fit and is not tied to a specific vehicle. Compatibility depends on the winch, not the vehicle.
It is a winch part, so compatibility depends on the winch, not the vehicle. Warn advises knowing the winch model number, battery voltage and serial number when choosing replacement parts.
Confirm the cable suits your winch model and battery voltage before ordering.
Installation notes
Disconnect the battery before working on electrical connections, route wiring away from heat, moving parts and sharp edges, and protect circuits with correctly rated fuses as the manufacturer directs. Follow the instructions supplied with the power disconnect cable, and check every connection after installation.
What’s included
One 41 inch Warn power disconnect cable.
Not included: Check the package contents against your installation, including any mounting hardware and connectors, before starting.









