Overview
The WARN Rock Crawler winch mount front bumper with D-ring mounts, part number 68450, is a black full-width steel bumper designed around WARN winches. No vehicle is named for it, so fitment has to be confirmed in WARN’s application guide.
WARN says its bumpers are engineered for use with its own winches and for the stresses of winching. This model is laser cut from 3/16 inch steel, CNC formed and robotically welded for a precise fit, and has a black powder-coated finish.
The black powder-coated finish is designed to hold up to winching stress and everyday use. Confirm fit for your vehicle’s year, model and trim before ordering, and confirm the winch you plan to run is compatible with this bumper.
Key features
- Laser cut from 3/16 inch steel, CNC formed and robotically welded
- Tapered ends for increased approach angles
- Welded eyelets for mounting D-shackles
- Pre-drilled holes for mounting lights
- Black powder-coated finish
- D-ring mounts and light mounts included
- Made to work with WARN winches
Winching with a front bumper
A front bumper with a winch mount takes the full load of every pull, so the bumper, the mounting bolts and the winch frame all work as one system. Use rated shackles through the welded eyelets, keep the line straight where possible, and avoid pulling at sharp angles across the bumper face.
Pre-drilled light holes make it practical to add driving lights, but the wiring and light weight should be planned before drilling. Route harnesses away from the winch cable and the fairlead area, and use grommets where wiring passes through the bumper.
Inspect the bumper after recoveries. Look for cracked welds around the eyelets, bent mounts, loose bolts and chipped paint at stress points, and touch up bare steel promptly. Replace the D-shackle and the winch hook if they show deformation, since they are the parts that fail under load.
- Use rated shackles through the eyelets
- Plan light wiring before drilling
- Inspect welds after every recovery
Specifications
| Brand | Warn |
|---|---|
| Part number | 68450 |
| UPC | 12748684503 |
| Product type | Winch mount front bumper |
| Position | Front |
| Width | Full |
| Material | Steel, 3/16 inch |
| Finish | Black powder coat |
| D-ring mounts | Included |
| Light mounts | Included |
| Fit type | Direct fit |
Vehicle fitment
The bumper is designed for use with WARN winches, excluding the Power Plant and the M8274-50.
Confirm fit for your vehicle’s year, model and trim before ordering, and check the bumper against your winch and mounting points before installation.
Installation notes
The bumper is built to carry WARN winches, so winch choice matters: the Power Plant and M8274-50 are not compatible with this bumper.









