Overview
The Warn 1827 is a 3/8-16 hex head capscrew, 1 inch long, offered for Warn winch replacement. A hex head is turned with a wrench or socket rather than a hex key, so the tool choice differs from a socket head screw.
No torque value or finish is stated, so use the winch documentation for torque when you install it.
Hex head tools and fastener care
A hex head capscrew is tightened with a wrench or socket, which grips the flats and lets you apply turning force evenly. Rounded flats usually come from a worn socket, an undersized tool or an attempt to turn a seized screw without penetrating oil. Choose a snug-fitting socket, and keep the tool square to the head as you turn.
Thread engagement is what holds the joint, so check the hole for debris, rust or damaged threads before installing. A hex head bolt used on a winch should match the original length, since a bolt that bottoms out or sticks through can prevent the part from seating. Store spare fasteners clean and dry, and replace any bolt showing corrosion on the threads.
- Use a socket that fully fits the flats
- Clean threads and remove debris before installing
- Replace bolts with corroded or stretched threads
Specifications
| Brand | Warn |
|---|---|
| Part number | 1827 |
| UPC | 12748018278 |
| Thread size | 3/8-16 |
| Length | 1 in |
| Head style | Hex head |
| Fitment | Universal fit |
Vehicle fitment
It is a Universal Fit fastener, so the bolt pattern you are replacing decides the match rather than a vehicle.
Match thread size and length to the original bolt. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use a wrench or socket that fully fits the hex head to avoid rounding it, and tighten with a torque wrench rather than by feel.
What’s included
The entry covers one Warn hex head capscrew, 3/8-16 by 1 in, part number 1827.









