Overview
The Warn 3962 is a socket head capscrew measuring 5/16-18 x 3/4 in, made for Warn Truck and Jeep winches. A socket head capscrew is a fastener driven with a hex key, and this one is identified by part number 3962 and UPC 12748039624.
It is universal fit, but fastener size is only part of the match, so the winch model still needs checking.
Key features
- Socket head capscrew, 5/16-18 thread
- Length of 3/4 in
- Brand Warn, part number 3962
- UPC 12748039624
Torque and thread care
A socket head capscrew carries its load through thread engagement, so a short engagement or stretched thread can loosen under vibration. Clean both the internal and external threads before fitting, and start the screw by hand to confirm it turns freely. If the screw binds early, stop and check for cross-threading or debris in the hole.
Winch mounts see repeated shock loads, so fasteners are worth checking after the first few uses and again after any heavy recovery. Look for backed-out screws, rust at the head, and rounded hex sockets, and replace any that show damage. If your winch requires a thread locker, use it consistently across all fasteners in the same group so the load shares evenly.
- Clean threads before fitting
- Check fasteners after heavy pulls
- Replace screws with rounded sockets
Specifications
| Brand | Warn |
|---|---|
| Part number | 3962 |
| UPC | 12748039624 |
| Thread size | 5/16-18 |
| Length | 3/4 in |
Vehicle fitment
No vehicle is named for this capscrew. It is a winch fastener, so the winch model and its thread requirement decide the match.
Compare the thread size and length with the winch’s parts list before using it.
Installation notes
Tighten to the torque value for your winch model before use.
What’s included
One socket head capscrew is described.
Not included: The winch and any washers.









