Overview
The Fab Fours Vengeance Bumper with Pre-Runner Guard in black powder coat, UPC 5810114640, is a front bumper for the 2017 to 2018 Ford Raptor. It is built from 11 ga. U.S. steel and weighs 75 lbs with the Pre-Runner guard.
The Vengeance Series is engineered to retain factory technology features, including Adaptive Cruise Control and Park Assist, when the optional relocation bracket M3850-1 is used.
The bumper has a sleek, stylish look with a high and tight fit, lower cutouts for airflow and an aggressive appearance on and off the road. This version has a Pre-Runner guard. The side mounts take two Rigid Industries Dually lights, and the center cutout takes a 20 inch LED light bar.
Key features
- Fits the 2017 to 2018 Ford Raptor
- Retains Adaptive Cruise Control and Park Assist with the optional bracket
- Pre-runner guard version
- Center mount for a Rigid Industries 20 inch LED light bar
- Mounting for two Rigid Industries Dually lights on each side
- Optional mesh inserts for the center cutout and side openings
- 2 stage matte black powder coat
- Made in the USA
Light bars and airflow
A bumper with a center cutout and side openings balances airflow and light mounting, and each opening changes how much debris can reach the radiator. Light bars and auxiliary lights add weight and wind load at the nose, so the mounting points should be checked after installation. Wiring for lights should be fused and routed away from heat and moving parts.
Mesh inserts can keep stones and brush out of the cutouts while still letting air through. Clean them regularly, since packed mud and leaves reduce airflow to the radiator. Lights aimed on level ground give the most useful beam pattern, and aim should be checked again after the bumper is mounted and the truck is loaded.
- Use a relay and fuse for each light circuit
- Aim lights after mounting on level ground
- Clean mesh inserts after trail use
- Check the mounts after heavy impacts
Specifications
| Brand | Fab Fours |
|---|---|
| Series | Vengeance Series |
| UPC | 5810114640 |
| Part type | Front bumper with Pre-Runner guard |
| Material | 11 ga. U.S. steel |
| Finish | 2 stage matte black powder coat |
| Weight, no guard | 65 lbs |
| Weight, Pre-Runner guard | 75 lbs |
| Optional mesh inserts | M2450-1 center, M3950-1 side |
| Optional relocation bracket | M3850-1 |
| Winch mount | Not included |
| Origin | Made in the USA |
Vehicle fitment
It fits the 2017 to 2018 Ford Raptor.
Other Ford trucks and model years fall outside this fit. Check your vehicle’s year, model and trim before buying.
Installation notes
The brackets provided tie directly to the frame. To keep factory features such as Adaptive Cruise Control and Park Assist, Fab Fours calls for the optional relocation bracket M3850-1, and the mesh inserts for the center cutout and sides are separate options.
What’s included
- Vengeance front bumper with Pre-Runner guard
- Mounting brackets that tie to the frame
Not included: the optional mesh inserts M2450-1 and M3950-1, the relocation bracket M3850-1, and the 20 inch LED light bar and Dually lights.
