Overview
The Fab Fours Vengeance Front Bumper with Pre-Runner Guard (Bare), part number FFIGM20-V5052-B (GM20-V5052-B), is a steel sensor bumper for the 2020–2026 GMC Sierra 2500 HD and 3500 HD. It comes in bare steel and includes the pre-runner guard.
The Vengeance Series is a line of light weight bumpers with a sleek, stylish finish. The bumper has an integrated 20 inch LED light bar housing in the center and mounting options on each side for two 3×3 inch cube LEDs. Its fit is high and tight, with lower cutouts for increased airflow, and each bumper is custom made to order.
Key features
- Premium steel sensor bumper
- Pre-runner guard included in this version
- Integrated 20 inch LED light bar housing in the center
- Mounting options on each side for two 3″ x 3″ cube LEDs
- Lower cutouts for increased airflow
- High and tight fit
- Custom made to order
Sensor bumpers and pre-runner guards
A pre-runner guard adds frame protection at the front of the bumper, guarding the grille and headlights from brush and small rocks on trails. It also adds weight and changes how air reaches the radiator, so think about cooling if you do a lot of slow, hot climbs.
Sensor bumpers hold parking and driver-assist sensors in place, and the sensor position has to stay aligned for those systems to read correctly. Before painting bare steel, clean and degrease the surface, then apply a primer suited to steel. Protect the sensor openings during painting so they stay clear.
Custom made parts take longer to arrive than stock items, so plan the install around that timing. Keep the part number and order details handy, since the bumper is made to order for a specific build.
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | FFIGM20-V5052-B |
| Product type | Front bumper (Vengeance Series) |
| Position | Front |
| Finish | Bare |
| Material | Steel |
| Guard | Pre-runner guard |
| Sensor compatible | Yes (sensor bumper) |
| Light bar housing | Integrated, 20 inch LED light bar, center |
| Side light mounts | Two 3″ x 3″ cube LEDs |
| Production | Custom made to order |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2020–2026 GMC Sierra 2500 HD and Sierra 3500 HD in the AT4, Base, Denali, SLE and SLT trims.
Earlier Sierra HD generations and the Sierra 1500 fall outside the 2020–2026 range. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Tighten all fasteners to the specified torque before driving. Support the vehicle on jack stands or a lift on level ground, never on a jack alone, and re-check fastener tightness after the first miles of driving.
Bumpers are heavy, so use a second person or a lift to position them. After installation, check that any lights, cameras and sensors still work and that nothing contacts the tires at full steering lock.
If the truck has parking or driver-assist sensors, confirm after installation that they work as intended. Wire any lights carefully through a fused relay, and keep connections sealed.
What’s included
A bare steel Vengeance front bumper with a pre-runner guard. Bumpers are custom made to order, so allow extra time for fulfillment, and cancelation fees may apply.
Not included: The LED light bar, cube LEDs and a finish coat for the bare steel are not included.











