Overview
The Vision X Lighting Optimus Series Prime 10-Degree LED Black Light in spot beam, part number 9123882, is a 3.25 inch square off road light with a 10 degree spot beam. It carries the model code XIL-OP110 and is a universal fit light.
It uses 10 Watt LED technology in a black powder coated die-cast aluminum housing. It has a multi-volt 9-32V DC input, an IRIS reflector, Prime Drive for reliability and output, a 2 inch mounting depth and weighs 1.25 pounds.
Key features
- 10 Watt LED technology
- 10 degree spot beam
- IRIS reflector optics
- Black powder coated die-cast aluminum housing
- Multi-volt 9-32V DC input
- Comes with an extended warranty.
Choosing a spot beam
A spot beam concentrates light into a narrow column, which suits long sight lines on open trails and straight desert roads. Narrow patterns reach farther but cover less width, so pairing this light with a wider lamp or a light bar helps when you need side coverage at close range. Compare the beam pattern against how you actually drive before mounting.
Mounting position affects both airflow and aim. LED lights run cooler when the housing can shed heat, so avoid sealing the back in a tight pocket. Re-aim after the first few trips, since bracket flex and bumper movement can shift the beam over time. Inspect the lens for cracks and the seal for moisture after rough runs.
- Recheck aim after the first few trips
- Keep the rear housing free of tight enclosures
Specifications
| Brand | Vision X Lighting |
|---|---|
| Part number | 9123882 |
| UPC | 887009123882 |
| Model | XIL-OP110 |
| Size | 3.25 inch square |
| LED power | 10 Watt |
| Beam | 10 degree spot |
| Input | 9-32V DC |
| Housing | Black powder coated die-cast aluminum |
| Mounting depth | 2 inch |
| Weight | 1.25 pounds |
| Warranty | Extended warranty |
Vehicle fitment
This light is a universal fit light, so it is not tied to a make, model or year. The mounting location and bracket choice decide where it works on your build.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Keep the supply within the 9-32V DC range and wire the light through a fused circuit. Check local rules before using off road lights on public roads.
What’s included
Check the package contents against your installation before starting.
Not included: a mounting bracket and wiring, to be planned before installation












