Overview
The California Super Trucks Uniball Upper Control Arm Kit, part number CSS-C2-16, is a front upper control arm kit for CST spindles. It uses 1.25 in. PTFE lined uniballs in sealed housings, which keeps the joints shielded from the elements, and it fits Chevrolet Silverado 1500 and GMC Sierra 1500 trucks.
The kit has CNC machined stainless taper pins and a gloss black powder coat finish. It has a large taper design and is made in the USA.
Key features
- Uniball joints with 1.25 in. PTFE lined bearings in sealed housings
- CNC machined stainless taper pins
- Gloss black powder coat finish
- Large taper design for CST spindles
- Made in the USA
Taper and spindle fit
Uniball joints allow a wide range of movement, which suits a truck that flexes off road, but the joint is only as good as the seal around it. Dirt, water and grit that reach a worn joint speed up wear, so inspect the seal and housing for splits or leaks during routine service. Stainless taper pins and sealed housings help keep the joints clean.
Taper pin fit matters as much as the arm itself. Clean the spindle taper before installing, inspect the threads and tighten the nuts to the level given in your installation instructions. Upper arm changes shift caster and camber, so plan a front alignment once the kit is in place. Check the spindle and taper for scoring before assembly, and replace parts that show damage rather than reusing them. On trucks that see heavy use, check the joints more often than on a daily driver.
Specifications
| Brand | California Super Trucks |
|---|---|
| Part number | CSS-C2-16 |
| UPC | 700007630411 |
| Position | Front upper |
| Taper pins | CNC machined stainless |
| Joint | 1.25 in. PTFE lined uniball |
| Housing | Sealed |
| Finish | Gloss black powder coat |
| Spindle | CST spindles, large taper |
| Made in | USA |
Vehicle fitment
It fits the 1999–2006 Chevrolet Silverado 1500, the 2007 Chevrolet Silverado 1500 Classic, the 2001–2003 and 2005–2006 Chevrolet Silverado 1500 HD, the 2007 Chevrolet Silverado 1500 HD Classic, the 1999–2006 GMC Sierra 1500, the 2007 GMC Sierra 1500 Classic, the 2001–2003 and 2005–2006 GMC Sierra 1500 HD and the 2007 GMC Sierra 1500 HD Classic.
Model year 2004 is not covered, and the non-Classic 2007 Silverado 1500 HD and Sierra 1500 HD are not covered. Confirm the year, model and trim match your truck before ordering.
Installation notes
The kit is designed for CST spindles, so confirm your spindles match before installation. Upper arm changes shift caster and camber, so have the front alignment checked once the kit is in place.
What’s included
The kit is an upper control arm kit with stainless taper pins and uniball joints. Confirm bolts, nuts and other hardware against your installation before starting.
Not included: Mount the kit on CST spindles, and confirm your spindles match before installation.









