Overview
The Pro Comp 13-90074A is a round U-bolt packaged with its hardware. It has a 0.5 in -20 thread and measures 2.5 in by 7 in, with a clear zinc plated finish.
A U-bolt clamps an axle to a spring, so the diameter and length are the figures to match to your setup.
Key features
- Round profile
- 0.5 in -20 thread
- Clear zinc plating
- Packaged with hardware
Choosing the right setup
A round U-bolt pulls the axle tight against the leaf spring or spring pad, so the clamp load depends on the thread and how evenly the nuts are tightened. Before buying, measure the axle tube diameter and the spring thickness, then compare them with the length of the U-bolt. A bolt that is too short will not seat the axle properly, and one that is too long can bottom out on the axle housing. Matching the new clamp to the shackles and spring plates avoids uneven loading.
After the first few trail runs, re-check the nuts. Clamp nuts can loosen as the spring settles and the axle moves over rough ground. Inspect the threads for stretching or rust, and replace a U-bolt that shows bends, cracks or flattened threads rather than reusing it.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 13-90074A |
| UPC | 614901130522 |
| Profile | Round |
| Thread | 0.5 in -20 |
| Size | 2.5 in x 7 in |
| Finish | Clear zinc plated |
| Hardware | Included |
Vehicle fitment
Check the axle diameter and spring setup against the 2.5 in by 7 in size before fitting. Before ordering, confirm the fit against your vehicle’s year, model and trim.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One packaged round U-bolt with hardware, part number 13-90074A.







