Overview
The Tuff Country Lift Kit (part number T/C42005) is a 2-inch rear lift for the 2007–2018 Jeep Wrangler JK, in both 2-door and 4-door (Unlimited) models.
The kit uses polyurethane coil spring spacers that mount above the factory rear coil springs. Tuff Country says they give slightly larger tire room and fender clearance.
Key features
- 2-inch rear lift for the JK
- Durable polyurethane construction
- Mounts above the factory coil springs
- Gives slightly larger tire clearance
Rear-only lift tradeoffs
A rear-only lift raises the back of a Wrangler JK while the front keeps its factory height. The result can look uneven, and it changes how the axles sit relative to the driveline. Many drivers pair a rear lift with a matching front setup later so the stance stays level, though that choice depends on how the truck is used.
Polyurethane spacers sit between the body and the factory coil springs, so the springs themselves are not replaced. Check the upper spring seats and the rubber isolators for wear at the same time, since a spacer adds load to them. Shock length may need a review, as the shocks run at a different angle once the body is higher.
- Re-check driveline angles after install
- Confirm brake line length
- Inspect spacers for cracks or compression
Specifications
| Brand | Tuff Country |
|---|---|
| Part number | T/C42005 |
| Lift | 2 inches, rear |
| Material | Polyurethane |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2007–2018 Jeep Wrangler JK models, in both 2-door and Unlimited 4-door bodies, in the 70th and 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims.
The Wrangler JL from 2018 onward and the TJ and LJ generations are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the spacer is a rear-only lift, the front and rear will differ in height. Check driveline angles and the brake line length after installation.
What’s included
Polyurethane coil spring spacers for the rear coil springs.









