Overview
The Trail Master 2.5-inch Lift Kit with NGS Shocks, model TM3525-20013, is a leaf spring lift kit that adds 2.5 inches of height. It is built to clear 31×10.50 tires and includes a replacement NGS shock.
The lift uses lifted leaf springs, which Trail Master says provide a smooth ride, and the kit includes U-bolts and all hardware.
Lifts over 1.5 inches can require driveline modifications on some vehicles, so measure the driveline angle before installing the kit at this height.
U-bolts and hardware are included, so the lifted springs can be installed without sourcing clamps and fasteners separately. The kit is built for 31×10.50 tires and improves ground clearance.
The kit is built around lifted leaf springs, with U-bolts, hardware and a replacement NGS shock. Because it is a leaf spring system, the work is limited to the rear end.
A 2.5-inch lift is a moderate change for a leaf spring vehicle. Tire clearance depends on the tire size you choose, and 31×10.50 is the size this kit is built for.
Check that the shock you run matches the relocation bracket requirement before installing, since the bracket is needed only with twin-tube shocks.
Key features
- 2.5-inch lifted leaf springs
- U-bolts and all hardware included
- Replacement NGS shock included
- Clears 31×10.50 tires
- Improves ground clearance
Leaf spring lift considerations
A leaf spring lift changes how the rear axle sits in the chassis, which shifts the pinion angle and can alter how the driveshaft works. Lifted springs also change the spring rate feel, so the ride may seem different until the suspension settles. Checking the axle position and the driveline before the first long drive helps avoid vibration and premature joint wear.
Leaf springs rely on their U-bolts and shackles to hold the axle in place. Retighten the U-bolts after the first few drives, then check them again at regular intervals. Inspect the leaf packs for cracks or shifting, and look at the shock mounts and brackets, since a lift can put extra stress on these points.
- Measure driveline angle before installation
- Retighten U-bolts after the first few drives
- Check leaf packs for cracks or shifting
- Inspect shock mounts and brackets for wear
Specifications
| Brand | Trail Master |
|---|---|
| Part number | TM3525-20013 |
| UPC | 614901083170 |
| Lift height | 2.5 inches |
| Suspension type | Leaf spring |
| Maximum tire size | 31×10.50 |
| Shocks | NGS replacement included |
Vehicle fitment
No vehicle is named for this kit and no fitment list is available. Trail Master gives only a direct-fit note, so check its specifications for the model and year that use this leaf spring lift.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
If you run twin-tube shocks, the rear shock relocation bracket RE2007 is required. Height increases over 1.5 inches can need driveline modifications on some vehicles.
What’s included
Lifted leaf springs, U-bolts, all hardware and replacement NGS shocks.







