Overview
The Trail Gear steering box conversion fitting, part 130263-1-KIT, is for people who want to tap their own steering box. Trail Gear says two fittings are required for each steering box conversion.
Each fitting has a male 1/4-inch pipe fitting on one end and a male #6 JIC fitting on the other. Trail Gear presents it as universal fit, but the threads are specific, so check your box and hose before use.
Key features
- Male 1/4-inch pipe end
- Male #6 JIC end
- Two fittings required per steering box conversion
- Designed for a steering box you tap yourself
Tapping and sealing the port
Tapping a steering box port needs a proper tap and cutting fluid, and the port should be measured before cutting so the thread fits the fitting. Clean out every chip before the fitting goes in, because debris that stays in the box can reach the steering valve and cause trouble later.
Pipe threads taper and typically need a sealant that is compatible with power steering fluid. The JIC end seals through its flare, so keep sealant off that side. Inspect the flare for nicks before connecting, and test for leaks with the system running, then recheck after a short drive.
- Remove all chips from the box before assembly
- Use sealant on the tapered pipe threads only
- Check the JIC flare for nicks before connecting
- Recheck for leaks after the first drive
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 130263-1-KIT |
| UPC | 70000621606 |
| One end | Male 1/4-inch pipe fitting |
| Other end | Male #6 JIC fitting |
| Fittings per conversion | Two |
Vehicle fitment
The brand lists universal fit and names no specific vehicles, model years or chassis codes. Check the steering box and hose sizes against the #6 JIC and 1/4-inch pipe ends before you use it.
Installation notes
The fitting is meant for a steering box that you tap yourself, so the port must be tapped before the fitting goes in. Plan on two fittings for each conversion.
What’s included
Confirm the kit contents against the fittings your conversion needs before starting. Plan on two fittings for each conversion.
Not included: A steering box, hose and tap are needed to complete the conversion. Gather them before starting.









