Overview
The Holley Performance standard fitting, part number 26-29, is a hose end fitting in the Hose End Fittings category. It is made for a 3/8 in. hose with 9/16 in. -24AN thread.
Confirm the fitting matches your hose and fuel line setup before use.
Hose ends and thread sealing
An AN hose end seals on a flared seat rather than on thread sealant, so the assembly depends on clean, undamaged flare surfaces. Cut the hose square, check for cracks or swelling inside the hose, and seat it fully before tightening the nut. Overtightening can crush the flare and cause a leak that is hard to see.
Fuel-rated hose and matching fittings work together, so replace hose and ends as a set when either shows wear. Check the line after the first drive and again after any engine service. Hard, cracked or swollen hose near a fitting is a sign it should be replaced, not retightened.
- Square cut at the hose end
- Clean, undamaged flare seat
- Snug tightening rather than forcing
- Leak check after the first drive
Specifications
| Brand | Holley Performance |
|---|---|
| Part number | 26-29 |
| UPC | 90127044049 |
| Hose size | 3/8 in. |
| Thread | 9/16 in. -24AN |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering, and check the fitting against your hose and fuel line.
Confirm your vehicle’s year, model and trim before ordering.









