Overview
The Crown Automotive 400502 is a manual locking hub set in chrome, with 27 splines and a plastic knob. Locking hubs connect a wheel to its axle shaft, so the driver can disconnect the front wheels from the axle when four-wheel drive is not engaged. The set carries a Direct Fit label from Crown Automotive.
Crown Automotive builds its catalog around replacement parts for Jeep vehicles. This set is not tied to a named Jeep model, model year or trim, so match the spline count and hub style to your vehicle before ordering.
Key features
- Manual locking hub set with a plastic knob
- 27-spline hub connection
- Chrome finish
- Direct Fit label from the manufacturer
Spline count and hub style
Locking hubs are mostly chosen for the shaft they connect to. A 27-spline shaft needs a 27-spline hub, and the mating teeth must be clean before the hub goes on. Dirt or rust on the splines can make a correct hub feel wrong, so cleaning them with a wire brush is worth doing before the first install.
Owners often replace hubs when the old ones have worn splines, a sticking knob or a hub that will not fully lock. Worn splines show as rounded teeth or a loose fit that rattles at the wheel. Bring the old hub when shopping, since matching it side by side is more reliable than relying on memory.
- Clean the shaft splines before fitting
- Look for rounded or chipped spline teeth
- Keep the old hub until the new one locks correctly
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 400502 |
| UPC | 848399000511 |
| Product type | Manual locking hub set |
| Spline count | 27 splines |
| Knob material | Plastic |
| Finish | Chrome |
| Fitment label | Direct Fit |
Vehicle fitment
No vehicle years, models or trims are named for this set. Direct Fit is the only fit statement, so the specific Jeep models and axles it works with are not confirmed.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check that your axle shafts carry 27 splines before buying, since a spline mismatch means the hub cannot engage the shaft. Verify the hub style on your vehicle as well.
What’s included
Check the package contents against your installation before starting.









