Overview
The ARB 4×4 Accessories 303008 is a front torsion bar, supplied as a pair. No vehicle, rating, dimensions or finish are given.
Confirm the vehicle, rating and length match your application before installing.
Replacing torsion bars in pairs
Torsion bars twist to carry weight and act as the spring for the front axle, so wear on one side changes ride height for the whole front end. A worn or sagging bar often shows as a lower corner, uneven tire wear or a front end that bottoms out. Replacing bars in pairs keeps both sides matched and avoids a handling pull.
Before starting, check the mounting points, the adjusting bolts and the bushings for rust or cracks. Torsion bars hold a large stored load, so the unloading procedure matters as much as the bar itself. Lubricate the splines when the new bars go in, and recheck ride height and alignment after the first trail runs.
- Replace bars in pairs for even ride height
- Inspect adjusting bolts and bushings for corrosion
- Recheck alignment after the first drives
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | 303008 |
| UPC | 881348002228 |
| Part type | Torsion bar |
| Position | Front |
| Quantity | 1 pair |
Vehicle fitment
Confirm the vehicle application before buying this front torsion bar pair.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Torsion bars hold a large amount of stored energy when loaded, so use the correct unloading tool and professional installation is recommended.
Mark the left and right bars so they return to the correct sides, grease the splines and torque the hardware to the specified value.
Have the alignment checked afterward and confirm there is clearance around the driveshaft and brake lines. Ride height limits vary, so check local rules.









