Overview
The TIS Offroad 544BMR is a 20×12-inch aluminum directional wheel in the 544 Series, finished in black and red milled, with part number TIS544BMR-2126844. It is listed with a 6 on 5.5 bolt pattern, which is the first figure to check against your hub.
Owners who want a two-tone milled face for an off-road build will notice the color split and the 12-inch width first. The offset of -44 and backspacing of 4.77 set how far the wheel sits in the fender, so measure clearance before fitting.
Key features
- Black and red milled finish with a two-tone face
- Directional style, meant to run in one rotation direction
- Aluminum construction
- 20-inch diameter and 12-inch width
- Second listed bolt pattern of 6 on 135 alongside the primary 6 on 5.5
Directional rotation and two-tone faces
A directional wheel only works correctly when it runs in the direction it was built for. Mounting it on the wrong side can change how the face and the lip sit against the hub and brake area, and the two-tone look can appear uneven. Look for the rotation marking on the face or back before any tire is mounted, and keep the marked side facing the correct way on each corner of the vehicle.
A two-tone milled face shows edge wear and scratches more clearly where the black and red areas meet. Keep tire bead lubricant and tools away from the milled edges during mounting, and use a soft mounting head to avoid marks. Tire balancing weights can also leave marks on the lip, so ask for clip-on weights where possible.
Routine care keeps the contrast sharp. Wash with a mild cleaner and rinse away brake dust regularly, since it can settle into the milled grooves. Inspect the bead seat and lug holes after each tire service, and check that all lug nuts are tight after the first drives.
- Rotation marking on each wheel
- Clip-on balancing weights
- Mild cleaner for brake dust
- Lug nut check after the first drives
Specifications
| Brand | TIS Offroad |
|---|---|
| Part number | TIS544BMR-2126844 |
| Series | 544 |
| Diameter | 20 inches |
| Width | 12 inches |
| Offset | -44 |
| Center bore | 108 |
| Backspacing | 4.77 |
| Bolt pattern | 6 on 5.5 |
| Second bolt pattern | 6 on 135 |
| Style | Directional |
| Finish | Black/Red Milled |
| Construction | Aluminum |
Vehicle fitment
No vehicle is named for this wheel. The fitment field reads Universal Fit, which does not confirm a bolt pattern, center bore or offset for any particular make, model or year.
This wheel is sold as universal fit. Its 6 on 5.5 pattern, 108 center bore and -44 offset need to match your hub and wheel well, so check them before choosing it.
Installation notes
Directional wheels are meant to roll one way, so mount each one on the side marked for it. Test-fit the wheel against your hub and make sure the bolt pattern and center bore match before tightening the lug nuts.
What’s included
The wheel is sold alone. Tires, lug nuts and mounting hardware are not included, so plan to source them separately.
Not included: tires and mounting hardware are not part of the stated contents.
