Overview
The TeraFlex 4951000 is a coil spring retainer for the front lower and rear upper spring positions on Jeep Wrangler JK and JKU models. Retainers keep a coil spring from unloading, rotating or shifting during rapid suspension cycling.
It is precision cut and zinc plated. It fits 2007–2015 Wrangler (JK) models in the trims covered below.
Key features
- Front lower and rear upper positions
- Precision cut construction
- Zinc plated for durability
- Designed to hold the coil spring in place during rapid suspension cycling
Spring retainers and suspension cycling
A coil spring retainer holds the spring in its seat so it cannot walk out of position when the axle cycles up and down quickly. Off-road, repeated compression and extension can work a spring sideways, which puts load on the seat and the retainer. Keeping the spring centered helps the suspension keep its geometry and avoids a noisy or uneven ride.
When inspecting, look at the retainer for cracks, flattened areas or heavy corrosion on the zinc finish, and check the spring for seat wear. Clean the seat before fitting a new retainer so it sits flat. After a few trail sessions, check that the spring has not shifted, since a moved spring often shows up as rattling or uneven ride height. Replace retainers in matched sets so both sides of the axle load the same way.
- Look for cracks or flattened spots on the retainer
- Clean the spring seat before fitting
- Check spring position after trail sessions
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 4951000 |
| UPC | 843885026495 |
| Position | Front lower and rear upper |
| Finish | Zinc plated |
| Construction | Precision cut |
| Compatibility | Jeep JK and JKU Wrangler models |
Vehicle fitment
It fits 2007–2015 Jeep Wrangler (JK) models in the 70th Anniversary, Rubicon, Sahara, Sport, X and Unlimited variants. It also fits JK and JKU Wrangler models.
Later Wrangler years and Gladiator models are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the package contents against your installation steps before starting, including the quantity per order and any hardware needed.









