Overview
The Daystar KU70007BK is a 2 inch Poly Flex joint kit, a weld-on pivot joint for suspension and steering links that works as a quiet alternative to a traditional Heim joint. Like a Heim, it holds a spherical ball inside a steel outer shell. Daystar encases that ball in a special blend of polyurethane, which lets the joint move through a greater range without binding at its attachment points.
The polyurethane keeps the joint quiet over time, and the joint can be rebuilt rather than replaced. It is a universal fit component for custom builds, where the joint is welded into a link or bracket of your own design.
Key features
- Spherical ball encased in polyurethane and held in a steel outer shell
- Greater range of movement without binding at the attachment points
- Quiet pivot that Daystar says does not make noise over time
- Serviceable and completely rebuildable
- Weld-on joint kit in a 2 inch size
Building a custom link
A pivot joint in a steering or suspension link has to handle angle changes as the axle cycles and the wheels steer. In a custom build, the joint is only as good as the link it sits in, so the tube wall, the bore and the weld penetration all matter. Clean the joint’s outer shell and the link bore before welding, and keep heat away from the polyurethane so the encased ball is not damaged.
Polyurethane joints wear differently from metal ones. Inspect the joint periodically for play, torn boots or cracked polyurethane, and check the link’s welds for hairline cracks where loads concentrate. Rebuilding the joint with new internals is usually easier than replacing a welded link, so keep service parts on hand for a long-term build. Careful fabrication and regular checks make a custom link last much longer under real load.
Specifications
| Brand | Daystar |
|---|---|
| Part number | KU70007BK |
| UPC | 814423017510 |
| Joint style | Weld-on joint kit |
| Joint size | 2 inch |
| Type | DOM |
| Maintenance | Serviceable |
| Thread direction | Not applicable |
Vehicle fitment
It is a universal fit kit and is not built for one vehicle model. Fit depends on the link or bracket the joint is welded into. Check the 2 inch joint size and the bore of your link before ordering.
Installation notes
The joint is welded in place, so installation needs welding equipment and welding skills. Set the joint’s angle and position in the link before welding, because it cannot be repositioned afterward.
What’s included
The Weld-On Joint Kit, which is the Poly Flex joint itself.
Not included: the link, tube or bracket the joint is welded into.









