Overview
The Daystar 2.5 Inch Poly Flex Joint (part number DAYKU70088BK) is a 2.5 inch diameter pivot joint with a spherical ball encased in polyurethane, housed in a steel outer shell. It is made for fabricators building suspension links that need a high-articulation pivot that stays quiet and serviceable.
The polyurethane encapsulation lets the joint move through a greater range without binding at its attachment points. The polyurethane bushing moves as the suspension articulates, and the joint stays quiet over time. It is fully rebuildable, and it is available with threaded studs or as a weld-on version.
Key features
- Polyurethane encased spherical ball for quiet operation
- Greater range of movement without binding at the attachment points
- Fully rebuildable with a joint rebuild kit
- Greasable bolt for routine service
- Available with a weld-on or stud mount outer shell
Joint placement and upkeep
A pivot joint works hardest where a link changes angle through a full range of suspension travel. Placement matters: the joint should sit where its axis lines up with the suspension geometry, and the mounting bracket should be strong enough for the loads it will see. The Poly Flex design moves through a wide angle, but it still needs a clean mount with enough clearance to swing freely.
Because the joint is greasable and rebuildable, service is a routine task rather than a replacement job. Grease it after trail use where water or grit may have entered, and check for play as the vehicle is worked. A worn bushing or ball can allow the link to rattle or bind, so rebuild the joint with the matching kit when play develops.
- Match the outer shell to your mounting plan
- Keep the greasable bolt accessible
- Grease after water or grit exposure
- Rebuild with the matching kit when play develops
Specifications
| Brand | Daystar |
|---|---|
| Part number | DAYKU70088BK |
| Diameter | 2.5 inches |
| Construction | Steel outer shell with polyurethane encased spherical ball |
| Joint type | Poly Flex joint, fully rebuildable |
| Maintenance | Serviceable |
| Kit contents | 2 half bushings, spherical ball, C-clips and greasable bolt |
| Mounting | Weld-on or stud mount outer shell |
Vehicle fitment
It fits the 1984-2001 Cherokee (XJ), the 1993-1998 Grand Cherokee (ZJ), the 2004-2006 Wrangler Unlimited (LJ) and the 1997-2006 Wrangler (TJ). Trims include Base, Laredo, Limited, Sport, SE, Sahara, Rubicon and Unlimited Rubicon, depending on the model.
This list does not include the 2007-2018 Wrangler (JK), the Wrangler JL, the Grand Cherokee WJ or the Liberty (KJ). Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The weld-on outer shell must be welded to the fabricated mounting bracket, while the stud mount version threads into a mount. Choose the outer shell that matches your mounting plan before cutting any tube. Keep the greasable bolt accessible so the joint can be serviced.
What’s included
The kit includes 2 half bushings, a spherical ball, C-clips and a greasable bolt.










