Overview
The Rock Krawler RK00221K Small Krawler Joint Rebuild Kit is for rebuilding or repairing Krawler Joints using the Small Joint Retainer. No vehicle year, make or model is named for this kit.
Removing and installing the small joint retainer requires the RK04487 Small Joint Socket Tool, sold as a separate item.
Key features
- Small joint rebuild kit for Krawler Joints
- Built around the Small Joint Retainer
- Requires the RK04487 Small Joint Socket Tool for removal and installation
- Covers rebuild and repair work on Krawler Joints
Before you start the rebuild
A joint rebuild starts with clean work. Krawler Joints collect grit and trail mud around the seals and retainer, so wash the joint housing and dry it fully before opening it. Lay the parts out in the order you remove them, because the small retainer and its internal pieces are easy to mix up once they are off the joint.
The retainer holds the joint together under load, so it deserves a close look. Check its threads and sealing surfaces for wear, galling or rounding. If the threads are damaged, replacing the retainer is usually a better choice than forcing it back into place, since a loose retainer can let the joint work out of its seat on rough terrain.
Reassembly is where most rebuilds go wrong. Use fresh grease, fill the cavity evenly and work the joint through its range before final tightening. Tighten the retainer snugly, then recheck it after the first few trail runs.
- Clean the housing and retainer threads before disassembly
- Replace any retainer with worn or damaged threads
- Pack fresh grease before final assembly
- Keep the RK04487 socket tool with the rebuild parts
Specifications
| Brand | Rock Krawler |
|---|---|
| Part number | RK00221K |
| Type | Small Krawler Joint Rebuild Kit |
| Joint type | Krawler Joints |
| Retainer size | Small |
| Required tool | RK04487 Small Joint Socket Tool (separate item) |
Vehicle fitment
No vehicle fitment is listed. The joint specifications, rather than a vehicle model, decide whether this kit suits your setup.
Installation notes
Have the RK04487 socket tool ready before any joint work begins; the small retainer cannot come out without it.
What’s included
Small Krawler Joint Rebuild Kit, part RK00221K.
Not included: RK04487 Small Joint Socket Tool.









