Overview
The Pro Comp 55770 is a heim joint rebuild kit for one spherical ball joint on a Jeep JK control arm, and it includes a special tool. It fits the 2007–2014 and 2018 Jeep Wrangler JK in the trims covered for this kit.
Key features
- Rebuilds one spherical ball joint per kit
- Special tool included
- For short arm kits
Signs a ball joint needs rebuilding
A spherical ball joint carries the load where the control arm meets the knuckle, and it lets the wheel steer and move up and down. As the joint wears, the internal bearing surfaces open up and the joint develops play. Drivers often notice a clunk over bumps, uneven tire wear on the front edge, or a steering wheel that feels loose at center.
A rebuild kit replaces the wearing parts inside the joint, but it does not repair a damaged control arm. Before starting, inspect the arm for bends, cracks and worn mounting bores. Use the included special tool to press the joint in and out carefully, and keep the arm square to the press so the bore is not damaged.
- Clunking or knocking over bumps
- Play felt in the steering at the front tires
- Uneven wear on the inner or outer tread edge
- A damaged dust seal that lets dirt into the joint
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 55770 |
| UPC | 614901117783 |
| Joint type | Spherical ball joint |
| Quantity per kit | One joint |
| Application | Short arm kits |
| Special tool | Included |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the 2007–2014 and 2018 Jeep Wrangler JK in Rubicon, Sahara, Sport, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited X trims. Confirm fit for your vehicle’s year, model and trim before ordering, and check that your control arm is the short arm style.
Confirm your vehicle’s year, model and trim before ordering, and check the control arm style, since the kit is for short arm kits.
Installation notes
A special tool is included for the rebuild. The rebuild replaces the spherical joint in one control arm, so both sides need separate kits if both joints are worn.
What’s included
- Heim joint rebuild parts for one spherical ball joint
- Special tool









