Overview
The Tekonsha 3070-P is a plug and play brake control wiring harness for a trailer brake controller. Tekonsha catalogs it under part number 3070-P for trailer brake wiring.
With universal fit stated, the harness is not tied to any one tow vehicle. The connectors on your controller and trailer decide whether this harness suits the setup.
Key features
- Plug and play connection for brake controller wiring
- Clear wire identification is the stated goal, so there is less guesswork
- Universal fit, so it is not built for one tow vehicle.
- Tekonsha part number 3070-P
Wiring a trailer brake harness
A brake control harness sits between the tow vehicle’s wiring and the trailer’s brake and light circuits. Its job is to route the signal from the controller to the trailer brakes while keeping turn signals and running lights working. Before connecting anything, compare the plug style and wire count on each end, since mismatched pins are a common cause of dead brakes.
Once the harness is in place, secure the wiring away from exhaust heat, moving parts and sharp edges. Test each function with the trailer connected, one circuit at a time. A harness that works for a light trailer may not suit a heavier setup, so confirm the controller you plan to use supports the same brake output before you tow.
- Compare plug styles at both ends
- Route wiring away from heat and moving parts
- Test each circuit before towing
Specifications
| Brand | Tekonsha |
|---|---|
| Part number | 3070-P |
| UPC | 783192008640 |
| Fitment | Universal Fit |
Vehicle fitment
The 3070-P is Universal Fit, so it is not built for one tow vehicle. Match its connectors and wiring to your brake controller and trailer.
Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
After hookup, check that the trailer brakes and lights respond before towing.
What’s included
The 3070-P is a wiring harness only. Not included: a brake controller unit.









