Overview
The Supersprings SSA4 is a rear leaf spring helper for the 2007–2018 Toyota Tundra in the 1794 Edition, Base, Limited, Platinum, SR, SR5 and TRD Pro trims. It mounts above the rear leaf springs and works in parallel with the factory suspension, engaging as load increases.
The helper adds 800 to 6000 lbs of additional capacity. The added spring rate helps reduce rear-end sag and improve towing, and its anti-sway design is built to reduce body roll during cornering.
Key features
- Provides 800 to 6000 lbs of additional capacity
- Direct-fit installation above the rear leaf springs
- Adjustable design
- Anti-sway properties that reduce body roll.
- Includes mounting kit PN[MTKT] and a specified bumpstop
Leaf spring helpers and towing
A leaf spring helper adds support when the rear springs are compressed by load, so it mainly matters when the truck is carrying cargo or towing. Between trips, the helper and the factory springs share the work, so the truck rides more evenly when the bed is loaded than when it is empty.
Helpers and bumpstops wear over time. Inspect the bumpstop for cracks and compression marks, check the mounting hardware for loosening, and look for shackle or bushing wear on the springs. If the ride height changes after a load, the helper setup should be checked before the next tow.
- Inspect bumpstops for cracks and flattening
- Check mounting hardware after the first drives
- Recheck rear ride height after heavy loads
Specifications
| Brand | Supersprings |
|---|---|
| Part number | SSA4 |
| UPC | 814699001268 |
| Additional capacity | 800 to 6000 lbs |
| Fitment type | Direct fit |
| Adjustable | Yes |
| Included hardware | Mounting kit PN[MTKT], specified bumpstop |
Vehicle fitment
It fits the 2007–2018 Toyota Tundra in the 1794 Edition, Base, Limited, Platinum, SR, SR5 and TRD Pro trims.
Tundra years outside 2007–2018 and trims not named in the list are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit includes mounting kit PN[MTKT] and a specified bumpstop, so the supplied parts should be used together during the mount. Confirm the bumpstop matches your Tundra’s rear suspension before the truck is loaded.
What’s included
It includes mounting kit PN[MTKT] and a specified bumpstop.





