Overview
The SuperSprings SSA27 is a pair of self-adjusting suspension stabilizing units for vehicles with rear leaf springs, sold as a left and right set. Its listed fitment is the 2007–2018 Toyota Tundra, where it works alongside the original leaf spring assembly to add load-leveling support and reduce body roll.
Each unit adds support when the vehicle is loaded, which helps keep the rear end level and limits how far the body leans in turns. The design is intended to keep ride quality intact. The units are made in the U.S.A. from SAE 5160H high-grade steel. Spring sizes vary by application, so confirm the part number before ordering.
Key features
- Self-adjusting suspension stabilizing system that adds load-leveling support to rear leaf springs
- Provides 1650 lb of additional load-leveling ability
- Reduces body roll by up to 30%
- Adjustable shackles let the installer set the fit for different setups
- SAE 5160H high-grade steel, shot peened to relieve spring stress and extend product life
- Maintenance-free and sold as a pair
Leaf spring helpers on a Tundra
A leaf spring helper for a full-size pickup adds support at the rear so the body stays more level when weight is added. It works alongside the factory leaf springs rather than replacing them, so the stock suspension still does most of the work. Its effect is most noticeable when the truck carries cargo, a camper or a trailer.
Before fitting a pair, inspect the factory leaf springs, shackles, bushings and shock absorbers for wear. Worn shocks can limit how well any helper controls body motion. Check tire load ratings and keep the vehicle within its gross vehicle weight rating. After the first loaded trips, recheck the hardware and look for any movement at the shackles.
- Inspect shackles and bushings
- Check shock absorbers before installing
- Recheck fasteners after loaded trips
Specifications
| Brand | Supersprings |
|---|---|
| Part number | SSA27 |
| UPC | 814699001275 |
| Sold as | Pair (left and right) |
| Material | SAE 5160H high-grade steel |
| Surface treatment | Shot peened |
| Additional load-leveling ability | 1650 lb |
| Body roll reduction | Up to 30% |
| Maintenance | Maintenance-free |
| Typical installation time | Approximately one hour |
| Shackles | Adjustable |
| Manufacturing | Made in the U.S.A. |
Vehicle fitment
It fits the 2007–2018 Toyota Tundra in the 1794 Edition, Base, Limited, Platinum, SR, SR5 and TRD Pro trims. Other years and Toyota models are not covered.
Years before 2007 and after 2018, and other Toyota models such as the Tacoma or 4Runner, are not covered by the listed fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The SSA27 works alongside the original equipment leaf spring assembly. The adjustable shackles let the installer fit each unit to the vehicle’s setup. Installation takes approximately one hour. Never load any vehicle beyond its gross vehicle weight rating, even with these units installed.
What’s included
The set is sold as a pair, one left and one right unit. Check the package contents against your installation plan before starting.









