Overview
The Supersprings SSA28 is a heavy duty SuperSpring, part number SSA28, that installs directly above a vehicle’s rear leaf springs to add load support. It is a helper spring for towing and heavier loads, rated for 800 lbs. to 6000 lbs. of additional capacity.
The spring works alongside the factory suspension and engages as the load demands. The added spring rate limits rear-end sag while towing, and the anti-sway design reduces body roll in corners, strong cross winds and buffeting from passing traffic.
Key features
- Heavy duty rating for 800 lbs. to 6000 lbs. of additional capacity
- Mounts directly above the rear leaf springs
- Added spring rate helps limit rear-end sag when towing
- Anti-sway properties reduce body roll
- Works in parallel with the existing suspension
- Load limit: never exceed the vehicle’s gross vehicle weight rating
Load range and suspension balance
A helper spring carries part of the load that would otherwise rest on the factory rear leaf springs. It is most useful when towing or hauling close to the vehicle’s limits, since the added support can help keep the rear steady under load. It does not raise the vehicle’s rated capacity.
Shock absorbers, bump stops and tires all work with the springs, so check them when you add a helper spring. Worn shocks can leave the rear bouncing even with added support, and worn tires may not handle the extra load well. Set tire pressures to suit the load you are carrying.
Ride height should be checked after installation and again once the vehicle is loaded. Look for uneven sag between the left and right sides, and confirm the springs have clearance from the body and axle at full compression. Recheck the mounting hardware after the first few trips.
- Check shocks and bump stops for wear
- Confirm tire pressure matches the load
- Compare ride height left to right after loading
Specifications
| Brand | Supersprings |
|---|---|
| Model | SuperSprings SSA28 |
| Part number | SSA28 |
| UPC | 814699001282 |
| Duty rating | Heavy duty |
| Additional capacity | 800 lbs. to 6000 lbs. |
| Mounting location | Directly above rear leaf springs |
Vehicle fitment
It is a direct fit for vehicles with rear leaf springs. Confirm your rear suspension uses leaf springs before installing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check clearance above the rear leaf springs and around the axle before starting, since the spring sits directly on top of them. Keep the total load within the vehicle’s gross vehicle weight rating at all times.
What’s included
Check the package contents against your installation, and confirm you have any hardware the install needs.








