Overview
The Supersprings SSA22 is a specialist SuperSpring, part number SSA22, that mounts directly above a vehicle’s rear leaf springs. It is a helper spring for towing and load support, rated for adjustable additional capacity from 800 lbs. to 6000 lbs.
The spring works in parallel with the factory leaf springs and comes into play when the load calls for it. It limits rear-end sag during towing and reduces body roll, with the effect most noticeable in corners, in strong cross winds and when buffeted by passing trucks. It is a direct fit kit for leaf spring rear suspensions.
Key features
- Specialist category SuperSpring for towing and load support
- Adjustable 800 lbs. to 6000 lbs. of additional capacity
- Helps limit rear-end sag while towing
- Anti-sway design reduces body roll in corners and cross winds
- Load limit: stay under the gross vehicle weight rating
Specialist helper spring use
Specialist helper springs are used for towing and heavier loads where the rear leaf springs need extra support. They work alongside the factory springs, so the combined setup changes how the rear suspension handles weight, with the most effect when the load is high.
Before installing, look over the leaf springs and their mounts for cracks, broken leaves and worn bushings. A helper spring adds load to these parts, so any existing wear should be addressed first. Check the space above the springs for clearance from brake lines and the frame.
Inspect the spring and its hardware periodically, especially after rough roads or heavy towing. Look for loose bolts, rust at contact points and any sign the spring is rubbing. Keep the setting appropriate to the load, and do not rely on the helper spring to correct an overloaded vehicle.
- Inspect leaf springs and mounts before install
- Check clearance from brake lines and frame
- Inspect bolts and contact points periodically
Specifications
| Brand | Supersprings |
|---|---|
| Model | SuperSprings SSA22 |
| Part number | SSA22 |
| UPC | 814699001077 |
| Category | Specialist |
| Additional capacity | 800 lbs. to 6000 lbs. |
| Adjustable | Yes |
| Dimensions | 43 in. L x 3 in. W x .558 in. |
| Mounting location | Directly above rear leaf springs |
Vehicle fitment
It is a direct fit for leaf spring rear suspensions. Verify your rear suspension type before installing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the space above the rear leaf springs before starting, because the 43 in. spring needs room to sit above them. Keep loads within the vehicle’s capacity ratings and the gross vehicle weight rating.
What’s included
Check the included pieces against your installation before starting, and confirm you have all required mounting components.









