Overview
The Supersprings SuperSpring mounting kit, model MTKT, supplies the 2 in. tall brackets and attachment hardware used to install SuperSprings above a vehicle’s rear leaf springs. It is a separate item from the springs themselves.
It is a direct fit for SuperSpring installations and is not limited to one year, make or model. Match it to the SuperSpring you plan to install, since the two are separate items.
Key features
- 2 in. tall brackets
- Attachment hardware included
- Built for SuperSprings installation above rear leaf springs
- Direct fit with no vehicle named
Bracket clearance and hardware
Brackets set the height and position of the SuperSpring, so clearance is the main thing to check before assembly. Mock up the brackets on the axle and leaf springs with the vehicle at its normal ride height, then confirm the spring will not contact the frame, wiring, brake lines or the tire at full compression. Tighten fasteners to the torque given in the vehicle’s service manual for the bracket grade.
Hardware should be checked after the first few drives, because leaf springs flex and vibration can loosen bolts. Look for bent or cracked brackets, rust at bolt holes and worn bushings. Replace any part that shows damage rather than reusing it, and keep spare fasteners on hand if the installation is done away from home. Recheck clearance once the springs settle.
Specifications
| Brand | Supersprings |
|---|---|
| Model | MTKT |
| UPC | 814699001213 |
| Bracket height | 2 in. tall |
| Included | Attachment hardware |
Vehicle fitment
The mounting kit is a direct fit for SuperSprings installations, and no year, make or model is attached to it. Confirm that your rear suspension has leaf springs and that the bracket height gives the right clearance.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Attach the brackets with the hardware that comes with the kit, and check the 2 in. bracket height against clearance above your rear leaf springs before tightening. Install the SuperSpring springs only after the brackets are secure.
What’s included
Includes 2 in. tall brackets and attachment hardware.
Not included: SuperSpring helper springs.









