Overview
The Supersprings MXKT is a mounting kit for SuperSpring leaf spring helpers, which install directly above the vehicle’s rear leaf springs. It fits the helper units to a supported truck and covers a long range of Chevrolet and GMC pickups and Suburbans.
The helpers work in parallel with the factory suspension to reduce rear-end sag and improve towing. Their anti-sway design reduces body roll. The kit supplies the hardware needed for that mounting.
Key features
- Mounting kit for SuperSpring leaf spring helpers
- Direct-fit design
- Long fitment list covering C/K, R and V series trucks and Suburbans
- Covers model years from 1970 through 2010 across the listed trucks
Helper kit installation basics
A leaf spring helper adds support above the main springs, so the mounting points carry real load. Before installing, check the spring pack, shackles and bushings for wear. Worn components can change how the helper seats and may need replacing before the mount goes in.
Mounting hardware should be checked after the first few drives, since bumps and loads can loosen fasteners over time. Look for cracks around the bracket welds and for signs of rust where the kit contacts the spring. Clean the contact surfaces before assembly so the parts seat evenly.
If the helpers are replaced later, the mounting kit can often be reused when the parts are in good shape. Inspect the brackets and fasteners at the same time, and replace any that show deformation.
- Check spring shackles and bushings before mounting
- Retighten fasteners after the first few drives
- Clean contact surfaces before assembly
Specifications
| Brand | Supersprings |
|---|---|
| Part number | MXKT |
| UPC | 70000563780 |
| Fitment type | Direct fit |
Vehicle fitment
It fits Chevrolet and GMC C/K, R and V series pickups and Suburbans, including the 1973–1986 Chevrolet C20, the 1988–2000 Chevrolet C2500 and C3500, the 1975–1978 GMC C25 and the 2001–2010 Chevrolet and GMC 2500 HD and 3500 models. Each entry includes its trims.
Ford, Ram and Dodge models and years outside the named entries are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The MXKT is a mounting kit for the helper units, so it is installed with the helper rather than as a standalone part. Check that your truck’s rear leaf spring setup matches the listed entry before beginning the mount.
What’s included
The kit includes the SuperSpring mounting hardware only. Helper units are not part of the kit.







