Overview
The Pro Comp 76406P is a pair of square 2×2 LED flood lights rated at 5W, finished in black, and it measures 4 inches in size. It is part of Pro Comp’s Explorer Series of high-intensity LED lights.
The Explorer Series lights deliver high lumens per watt and carry a 50,000+ hour life span. The housing is IP67 with a shockproof 3800 polyester powder coat case, and each light comes with the wiring harness, switch, relay and two sets of mounting brackets and hardware.
Key features
- 5W LED flood beam in a square 2×2 housing
- 50,000+ hour life span
- IP67 housing with shockproof 3800 polyester powder coat case
- Clear lens
- Wiring harness, switch and relay included
- Two sets of mounting brackets and hardware
Choosing a flood pattern
A flood beam spreads light wide and close to the vehicle, which helps with camp setup, trail edges and reading the ground under the front bumper. It is less useful for seeing far down a dark trail, so many drivers pair flood lights with a spot or a light bar when distance matters. Square 2×2 housings tend to fit flat bumper and grille panels, which keeps the lens angled where it is needed.
Before drilling, lay the lights on the mounting surface, check the wiring run and the switch location, and confirm the housing clears any hood or grille movement. The included relay should be wired to a fused, switched source so the harness is protected from overload.
- Test the aim on level ground before final tightening
- Route the harness away from moving parts and heat
- Keep the lens clean for consistent output
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 76406P |
| UPC | 844658036246 |
| Light type | LED flood |
| Power | 5W |
| Light shape | Square |
| Size | 4 inch |
| Lens | Clear |
| Housing | IP67, shockproof 3800 polyester powder coat case |
| Mounting | Bracket |
| Finish | Black |
| Sold as | Kit (pair) |
Vehicle fitment
Pro Comp lists these lights as universal fit, so they are not built for one vehicle. Mounting depends on your bumper, grille or roof location, and the included brackets are meant for the common mounting positions.
Check that the chosen mounting spot clears the lights’ housing and wiring before drilling. Confirm your vehicle’s year, model and trim before ordering the mounting hardware.
Installation notes
The lights ship with a wiring harness, switch and relay, so they can be wired through the included relay and switch. Check your local rules for auxiliary lighting before using these on public roads.
What’s included
A pair of square LED flood lights, a wiring harness, a switch, a relay, and two sets of mounting brackets with hardware.




























