Overview
The Spyder Auto Group 5010032 is a pair of black Halo LED projector headlight assemblies for Dodge Ram pickups. They replace stock headlights and use the stock bulbs.
Each housing combines a halo ring with an LED projector, changing the front appearance of the truck.
Key features
- Halo ring with LED projector lighting in each housing
- Replacement design for stock headlight locations
- Uses stock bulbs
- Supplied as a pair, one for each side
- Black finish
Wiring and relay basics
LED headlights draw current differently from halogen bulbs, and running them straight from a factory switch can stress that switch over time. A relay moves the load off the switch and lets the wiring run shorter, cleaner paths. Use a fuse suited to the circuit, and keep relay wiring away from hot exhaust components and moving suspension parts.
Grounding matters as much as power. Scrape paint from the ground point, tighten the bolt, and confirm the connection is solid before you test the lights. Polarity mistakes can damage LED drivers, so double check the plug orientation against the harness before closing the hood.
- Use a relay kit with a fuse close to the battery
- Route wiring away from sharp edges and heat sources
- Test both high and low beams before final mounting
Specifications
| Brand | Spyder Auto Group |
|---|---|
| Part number | 5010032 |
| UPC | 847245010032 |
| Type | Headlight assembly with Halo, LED |
| Color | Black |
| Quantity | Pair |
| Bulbs | Uses stock bulbs |
| Fitment note | Labeled Universal Fit; match it to the trucks below before ordering. |
Vehicle fitment
It fits 2009–2010 Dodge Ram 1500; 2010 Dodge Ram 2500 and 3500; and 2011–2016 Ram 1500, 2500 and 3500 pickups. Confirm fit for your vehicle’s year, model and trim before ordering, since the Universal Fit label does not replace a vehicle match.
Ram 1500, 2500 and 3500 model years outside these ranges, and the 1994–2008 generation, are not in the list. Check your truck’s year, model and trim against the entries above.
Installation notes
Replacement LED headlights should be wired through a fused relay to protect the headlight circuit, and headlight color and brightness must meet your local road-use rules.
What’s included
A pair of Halo LED projector headlight assemblies, one per side, that use stock bulbs.
Not included: Check the package contents against your installation before starting, including bulbs and wiring.
