Overview
The Smittybilt XRC 76897LT is a pair of rock sliders with a step, made for the two-door Jeep Wrangler JK. The sliders are formed from 3/16-inch solid plate to follow the vehicle’s shape, and a 1.75-inch over-rider tube protects the lower edge.
The finish is a light texture black, and the installation is bolt-on with no cutting or drilling required. The sliders will not work with XRC Armor fenders in part numbers 76880, 76881 or 76882, so check that you are not planning to pair them with those fenders. Smittybilt gives a five-year finish warranty.
Key features
- Formed 3/16-inch solid plate
- 1.75-inch over-rider tube
- Light texture black finish
- Bolt-on installation
- Five-year finish warranty
Protecting the rocker area
On a two-door Wrangler the rocker area sits low and close to the trail, so side guards take hits that the frame and body would otherwise absorb. A plate guard spreads impact over a wider area, and a step gives a way up that keeps the sill from being stepped on. Both functions matter most on rocky routes where the tires climb over ledges.
Fender choice affects the whole side of the vehicle. Because these sliders do not work with the XRC Armor fenders, plan the fender setup first and then match the rest of the body armor to it. Mixing parts from different systems often causes bolt holes that do not line up or guards that sit too far from the body.
Check the step regularly. A loose or bent step can rattle or catch a boot, so inspect the attachment bolts with the rest of the suspension hardware. Powder coat that chips on the lower edge is a sign the plate is taking real impact and needs a quick touch-up.
- Confirm the fender system before ordering other armor
- Inspect the step mounts after each trail trip
- Touch up chips on the lower edge early
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 76897LT |
| UPC | 631410137262 |
| Type | Side plates with step |
| Plate thickness | 3/16 inch solid plate |
| Over-rider tube | 1.75 inch |
| Finish | Light texture black powder coat |
| Body style | Two-door Wrangler JK |
| Installation | No cutting or drilling required |
Vehicle fitment
It fits two-door Jeep Wrangler JK models from 2007 to 2018. The JK generation covers 2007 to 2018 Jeep Wrangler models.
Four-door Wranglers and the JL are not covered by the two-door listing. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The sliders are bolt-on and need no cutting or drilling. They do not work with XRC Armor fenders in part numbers 76880, 76881 or 76882, so do not plan to pair them with those fenders.






















