Overview
The Smittybilt XRC light bar, part number 76911, is a matte black bar for mounting a 9 inch light or a 50 inch LED light bar on the front of the vehicle. It has a 1.5 inch race tubing cross bar with five light tabs, and it bolts on without drilling.
It is a 2- and 4-door fit and is not tied to a specific year, make or model. The side supports are cut from a single piece of cold rolled steel, and the light tabs can be adjusted across the bar.
Key features
- Five light tabs on a 1.5 inch race tubing cross bar
- Holds a 9 inch light or a 50 inch LED light bar
- Race-style side supports cut from a single solid piece of cold rolled steel
- Bolt-on installation with no drilling
- Matte black finish
Matching lights to the bar
A light bar only works as well as the lights mounted on it. Pick lights whose housings sit square on the tabs, and check that the combined weight is within what the mounting points are meant to carry. Beam pattern matters too: a spot pattern reaches farther down a trail, while a flood pattern spreads light across the front of the vehicle at close range.
Wiring should be planned before the bar goes on. A relay, a fused feed close to the battery and a dash switch keep the load off the original switches. Route the cables along the frame, away from hot and moving parts, and secure them so they do not sway. Lights set at the front are exposed to brush and rock strikes, so check the tab bolts and aim after rough runs.
- Match the light housing size to the tab spacing
- Use a relay for each light circuit
- Keep cable runs away from exhaust and moving parts
- Check tab bolts after the first few trail runs
- Re-aim the lights after any bar adjustment
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 76911 |
| Color | Matte black |
| Light tabs | 5 |
| Cross bar | 1.5 in race tubing |
| Accepts | 9 in light or 50 in LED light bar |
| Side supports | Cold rolled steel |
| Location | Front |
Vehicle fitment
The light bar fits 2- and 4-door models and is not vehicle-specific. Check light tab spacing and the bar’s width against your vehicle’s mounting points before installing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The light bar is a bolt-on installation that requires no drilling or modifications to the vehicle. Confirm that your lights fit the 9 inch or 50 inch tab sizing before mounting.
What’s included
The light bar with five light tabs is included. The 9 inch lights and the 50 inch LED light bar are not included.
Not included: the 9 inch lights or the 50 inch LED light bar.




















