Overview
The Smittybilt XRC Front Armor Skins 76980 are a pair of black powder coat steel front fender armor skins for the 2007-2018 Jeep Wrangler JK, 2-door and 4-door. The alternate part number is S/B76980.
The skins let the stock fenders be bolted back on and contour to the OE panels. Steel thickness is 1/8 inch or 3/16 inch cold rolled, so confirm the gauge before ordering if it matters to you. The finish is a two-stage textured matte black powdercoat with a 5 year limited warranty, and the skins can be used with XRC Armor Rocker Guards.
Smittybilt says each skin comes with everything needed for installation, including stainless steel hardware and detailed installation instructions. Drilling is required.
Key features
- Front armor skins for 2-door and 4-door models
- Cold rolled steel construction, supplied as a pair
- Contours to the OE panels
- Lets the stock fenders be bolted back on
- Two-stage textured matte black powdercoat
- 5 year limited warranty on the powdercoat
- All mounting hardware included
- Can be used with XRC Armor Rocker Guards
Fender skins and the stock parts
Fender skins sit over the stock fender and change how the fender edges meet the body, so the fit depends on the bolt pattern and the condition of the original mounting points. Before installing, clean and inspect the stock fender for rust, cracks and bent flanges, since those issues carry over to the new skin. Test fit the skin before final tightening so the gap lines up evenly.
Drilling changes the surface, so treat bare holes with a touch-up coating to slow corrosion, and use the stainless hardware for a long-lasting connection. Fender skins collect mud and grit in the gap along the edges, so rinse them after trail use and dry the seams. Check the fasteners every few months, especially on vehicles that see a lot of water or mud.
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 76980 |
| UPC | 631410124149 |
| Product type | Front armor skins (XRC) |
| Alternate part number | S/B76980 |
| Position | Front |
| Material | Cold rolled steel (1/8 inch in short text, 3/16 inch in description) |
| Finish | Black powder coat, two-stage textured matte black |
| Corner type | Full |
| Quantity | One pair |
| Hardware | All mounting hardware included, stainless steel |
| Fit type | Direct fit |
| Installation type | Cutting or drilling required |
| Warranty | 5 year limited warranty on the powdercoat |
Vehicle fitment
The skins fit these Wrangler JK years and trims.
- 2007–2016, 2018 Jeep Wrangler (JK) (70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X)
Fitment covers 2007-2016 and 2018 Wrangler JK trims. The 2017 model year, TJ, LJ and JL are not covered. Check your vehicle’s year, model and trim before buying.
Installation notes
Drilling is required for installation, and the stock fenders can be bolted back on. Follow the hole locations in the installation instructions included with the skins.
What’s included
All mounting hardware, including stainless steel hardware, and detailed installation instructions come with the skins, which are supplied as a pair.




























