Overview
The Smittybilt XRC Rear Quarter Panel Armor Skins 76982 are a pair of black powder coat steel rear skins for 4-door 2007-2018 Jeep Wrangler JK Unlimited models. The alternate part number is S/B76982.
The skins give full rear quarter panel protection from door jam to tailgate jam and contour to the OE panels. They add integrated protection for the rear tail lights, and the stock fenders can be bolted back on. The steel is cold rolled.
The finish is a two-stage textured matte black powdercoat with a 5 year limited warranty. Smittybilt says all mounting hardware is included, with stainless steel hardware and detailed installation instructions, and that drilling is required.
Key features
- Rear quarter panel armor for 4-door models
- Protection from door jam to tailgate jam
- Integrated protection for the rear tail lights
- Contours to the OE panels
- Two-stage textured matte black powdercoat
- 5 year limited warranty on the powdercoat
- All mounting hardware included
- Can be used with XRC Armor Rocker Guards
Fit and finish checks
Rear quarter panel skins for the JK Unlimited add a layer of steel over the factory panels, so the fit around the door jam and tailgate jam matters for both appearance and water control. Lay each skin against the body before marking holes, and look for even gaps along the top edge and beside the tail light opening. If a skin sits proud anywhere, correct the alignment before drilling, because a bad fit is hard to fix after the fenders are bolted back.
Longer rear sections on any Wrangler change how armor flexes over rough terrain. Consider the tire size, suspension lift and any rear bumper you run, since those change clearance around the quarter panels. After the first few off-road trips, check the mounting bolts, look for scuffed powder coat near the edges, and touch up bare metal before rust can spread.
- Mark hole positions with painter’s tape first
- Confirm clearance with the doors open and closed
- Keep stainless hardware sorted by location
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 76982 |
| UPC | 631410124163 |
| Product type | Rear quarter panel armor skins (XRC) |
| Alternate part number | S/B76982 |
| Application | 4-door models |
| Position | Rear |
| Material | Cold rolled steel (1/8 inch in short text, 3/16 inch in description) |
| Finish | Black powder coat, two-stage textured matte black |
| Corner type | Full |
| Quantity | One pair |
| Hardware | All mounting hardware included, stainless steel |
| Fit type | Direct fit |
| Installation type | Cutting or drilling required |
| Warranty | 5 year limited warranty on the powdercoat |
Vehicle fitment
The 76982 fits the Wrangler JK Unlimited, 2007-2018.
- 2007–2018 Jeep Wrangler (JK) (Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X)
The 76982 fits Wrangler JK Unlimited (4-door) models from 2007 to 2018. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Drilling is required for installation. The stock fenders can be bolted back on, and the included stainless steel hardware and detailed instructions cover the hole locations around the tail lights. Follow those instructions closely.
What’s included
All mounting hardware, including stainless steel hardware, and detailed installation instructions come with the skins, which are supplied as a pair.


























