Select your vehicle
-13%

Smittybilt XRC Armor Rear Bumper with Hitch – 76855

Smittybilt

Check today’s price on Amazon

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rear bumper with receiver hitch and two D-rings
  • Matte black two-stage powder coat
  • 3/16 inch cold rolled steel, robotically welded
  • For 2- and 4-door models; fitment not listed by year

Description

Overview

The Smittybilt XRC Armor rear bumper, part number S/B76855, has a receiver hitch and two D-rings. It adds a tow hitch mount to the XRC design used on Smittybilt front bumpers.

The bumper is made from 3/16 inch cold rolled steel that is robotically welded. It has a two-stage matte black powder coat finish and a Class III tow rated receiver hitch.

Key features

  • Receiver hitch
  • Two D-ring mounts
  • Two-stage matte black powder coat
  • 3/16 inch cold rolled steel
  • Robotically welded
  • For 2- and 4-door models

Mounting and tow hitch use

A rear bumper with a receiver hitch changes how the vehicle carries load and how it approaches obstacles. Before using the hitch, confirm the towing rating of your vehicle and the hitch class, and keep the trailer load within what the vehicle and hitch allow. Bumper weight also shifts rear overhang, which can affect the departure angle on steep trails.

Steel bumpers protect the rear body and can carry a spare tire or accessories, but mounting points take stress over time. Recheck bolts after the first several trail runs, and look for cracks around the weld seams and mount brackets. Touch up any chips in the powder coat early so rust does not start under the finish.

  • Check hitch pin and ball clips before each tow
  • Recheck mounting bolts after rough trail use
  • Inspect weld seams for cracks
  • Touch up coating chips promptly

Specifications

Brand Smittybilt
Part number S/B76855
Position Rear
Material 3/16 inch cold rolled steel
Finish Two-stage matte black powder coat
Hitch Class III receiver
D-rings Two
Fitment Direct fit

Vehicle fitment

The bumper is for 2- and 4-door models. Confirm the year, model and trim fit before ordering.

Fitment is open by year and model for this bumper, so match it to your vehicle before buying.

Installation notes

It is a bolt-on rear bumper with a tow hitch mount. Bumpers are sized to a specific vehicle, so check the mounting points on your vehicle before installation.

What’s included

The rear bumper with receiver hitch and two D-rings.

SKU: S/B76855 Category:

Specification

Shipping weight 107.00 lbs
Package dimensions 69.00 × 20.00 × 14.00 in
brands

Questions & Answers

Does this bumper fit a Jeep Wrangler?

It is designed for 2- and 4-door models. Verify the year, model and trim before you order it, and check the mounting points before installing.

Is there a receiver hitch?

Yes. The bumper has a Class III receiver hitch and two D-rings, so a tow hitch mount is built into the rear bumper.

What finish does the bumper have?

The finish is a two-stage matte black powder coat. The bumper is made from 3/16 inch cold rolled steel, which is robotically welded, so the finish sits over a welded steel frame. Check the finish condition after installation.

How should the powder coat finish be cleaned?

Wash it with mild soap and water, and rinse off mud after trail use. Avoid harsh solvents on the coating, and touch up chips with a matching paint before moisture reaches the steel.

Find it on Amazon

See today’s price and delivery options on Amazon, and check out with your Amazon account.

Check today’s price on Amazon