Overview
The Addictive Desert Designs HoneyBadger Rear Bumper, part number R117321370103, is a boxed steel rear bumper for the 2017–2018 Ford F-150 Raptor.
The HoneyBadger uses 1/8″ external steel plating and 3/16″ internal structure plating in a modern box design. Reinforced clevis mounts made from 1″ steel accept a 3/4″ D-ring, and dual Dually mounts are built in for rear lighting. The bumper is designed to retain the factory dual exhaust and tow hooks and keeps the 2017 Raptor’s backup sensors working.
Key features
- 1/8″ external steel plating and 3/16″ internal structure plating
- Modern box design
- Reinforced clevis mounts from 1″ steel for a 3/4″ D-ring
- Dual Dually light mounts built in
- Retains factory dual exhaust and tow hooks
- Compatible with the factory backup sensors
- Dimpled step plates on top
- Made in the USA
Choosing D-rings and recovery mounts
Clevis mounts are built to take a D-ring shackle, which connects the bumper to recovery straps or winch lines. The D-ring size must match the mount opening, and the shackle should be rated for the load it will carry. Pin type and thread condition also matter, since a worn pin can work loose under strain. Choose hardware suited to the recovery work you expect to do.
Recovery loads place large forces on the bumper and frame. Use a snatch strap or kinetic rope rather than a chain, and keep people clear of the line during a pull. After any recovery, inspect the mounts for bent metal, cracked welds and loose fasteners. Replace damaged shackles promptly, since a failed connection can release with force.
- Match the D-ring size to the clevis opening
- Use shackles rated for the expected load
- Inspect mounts and fasteners after each recovery
Specifications
| Brand | Addictive Desert Designs |
|---|---|
| Part number | R117321370103 |
| UPC | 814849023881 |
| Product type | Rear bumper |
| Model line | HoneyBadger |
| Position | Rear |
| External plating | 1/8″ steel |
| Internal structure plating | 3/16″ steel |
| Clevis mounts | 1″ steel, accept a 3/4″ D-ring |
| Finish | Hammer black powder coat |
| Panel color | Satin black |
| Fitment type | Direct fit |
| Receiver hitch | No |
| Tire carrier | No |
| D-ring mounts | Not included |
| Country of manufacture | USA |
Vehicle fitment
It fits the 2017–2018 Ford F-150 Raptor.
Its shape follows the 2017 Raptor dovetail style, so other F-150 models and years are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The HoneyBadger is designed to retain the factory dual exhaust and tow hooks, and it maintains compatibility with the 2017 Raptor’s factory backup sensors, so those parts remain usable. Dimpled step plates on top of the bumper give a better surface for footwork.
The clevis mounts are reinforced for recovery use but come without a D-ring; a 3/4″ D-ring is needed to use them. Lights for the built-in Dually mounts are also separate items.
What’s included
- HoneyBadger rear bumper with clevis mounts
Not included: a D-ring, dually lights and any other accessories.









