Overview
The trailer wire harness is an OE style wire adapter that plugs into the vehicle’s factory wiring harness. Trailer lights connect without splicing wires together, and the adapter is made to OEM specifications.
The connectors are built for a watertight seal and a solid connection. The main benefit is avoiding guesswork about which wire goes where when wiring a trailer connection.
Key features
- Plug and play design
- No cutting, splicing or taping
- Connectors built for a watertight seal
- OE style wiring adapter
Trailer wiring basics
Trailer lighting depends on a correct ground as well as a correct signal, so a plug-in adapter solves only part of the job. Check that the trailer’s own wiring is intact, that its connector pins are clean, and that the trailer lights respond to each signal before the first trip. Test brake, turn and running lights with a helper or a simple tester.
Corrosion is the most common cause of intermittent trailer lights. Inspect the connectors periodically, look for green residue or discoloration on pins, and clean them with a contact cleaner if needed. Keep the plug covered when the trailer is unhitched, and avoid pulling on the wires when disconnecting. Reconnect the trailer before every trip and recheck the lights after any bumps or long drives.
Specifications
| Brand | Smittybilt |
|---|---|
| UPC | 631410109658 |
| Product type | Trailer wire harness adapter |
| Design | Plug and play, OE style |
| Connectors | Watertight, OEM quality |
Vehicle fitment
Confirm the harness plug matches your vehicle’s factory harness before ordering, since the adapter plugs into that harness.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the harness plugs into the factory harness, no wires need to be cut or spliced. Disconnect the vehicle’s battery before connecting any wiring, as a general safety step.
















