Overview
The Curt 56307 is an OEM vehicle to trailer connector with a harness, part number 56307. It is a 7 Way Flat connector, and the install time is given as 20 min. It is meant for connecting a vehicle’s wiring to a trailer.
Before installing a harness
A vehicle to trailer harness connects the tow vehicle’s wiring to the trailer lighting and charging circuits, so it is worth reviewing the layout before any cutting begins. Compare the connector with the factory wiring at the back of the vehicle and note where each circuit lands. Leave the existing harness intact where possible, since a clean tap is easier to reverse than a cut.
Route the new harness along the frame or under the body away from heat, sharp edges and moving suspension parts. Secure it with clips and check the clearance at full steering lock. After the first trips, re-check the connections for loose terminals, chafing and any corrosion where the plug meets the trailer.
- Test every light before the first trip
- Keep the harness clear of exhaust heat
- Re-check the clips after rough roads
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | 56307 |
| UPC | 612314563074 |
| Connector type | 7 Way Flat |
| Install time | 20 Min. |
| Included | Harness |
Installation notes
The stated install time is 20 min. Confirm the harness and connector wiring before connecting the trailer to the vehicle.
Vehicle fitment
No vehicle years, makes or models are named for this connector. Check it against your vehicle’s factory wiring before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The connector with its harness.
Not included: Confirm whether mounting hardware and trailer-side wiring are needed for your installation before starting.









