Overview
The Smittybilt Rear Bumper Locking Cubby Cover, part number S/B2764, is a welded steel storage cubby with a locking door that mounts out of sight inside the rear bumper. It secures keys, cards and other valuables while you are off the road, and it does not interfere with the receiver or license plate.
The cubby has a black textured powder coat and fully welded construction. The steel and welded build is designed to deter theft, and the door has a pick-resistant stainless steel lock. It bolts to the bumper and is a direct fit for the 2016–2023 Toyota Tacoma, 2020–2023 Jeep Gladiator and 2021–2023 Ford Bronco.
Key features
- Rear locking cubby that mounts out of sight
- Pick-resistant stainless steel lock
- Fully welded construction with a locking door
- Bolts to the bumper
- Does not interfere with the receiver or license plate
Using a bumper cubby safely
A bumper cubby suits small, flat items such as keys, cards and a spare fob. Heavy or sharp items can damage the welded box, rub on the bumper or cause rattling, so keep the contents light and secure. Empty the cubby before any trail run where the bumper may take impacts.
Check the bumper mounting bolts after the first few drives and after rough trails, since a loose bolt is a common cause of rattling. Keep the door latch clean and lightly lubricated, and check that the door closes fully before you drive off. Make sure the cubby does not block the license plate lamp or the receiver pin.
- Re-check bumper bolts after rough use
- Keep the lock clean with a dry lubricant
- Check the cubby seams for paint damage or rust
Specifications
| Brand | Smittybilt |
|---|---|
| Model | Rear Bumper Locking Cubby Cover |
| Part number | S/B2764 |
| Position | Rear bumper, inside |
| Material | Steel |
| Finish | Black textured powder coat |
| Lock | Pick-resistant, stainless steel |
| Construction | Fully welded |
| Compatible bumpers | Smittybilt S/B79858, 4WP Factory 4WP61448W, 4WP Factory 4WP61468W |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2016–2023 Toyota Tacoma, the 2020–2023 Jeep Gladiator and the 2021–2023 Ford Bronco.
It fits only Smittybilt S/B79858 and 4WP Factory 4WP61448W or 4WP61468W bumpers, so check the bumper part number before ordering. Other Tacoma years and any model year after 2022 are not covered. Confirm your year, model and trim fit before ordering.
Installation notes
The cubby bolts to the bumper and mounts out of sight. It does not interfere with the receiver or license plate. Confirm the bumper part number before buying the cubby.
What’s included
The welded steel locking cubby with its door and pick-resistant lock.












