Overview
The Rugged Ridge 11540.22 is a pair of XHD bumper storage ends for the 2007-2018 Jeep Wrangler JK, 2-door and 4-door models. The lockable storage ends bolt to Rugged Ridge XHD modular front bumpers and turn the bumper into a water tight storage box.
The XHD Modular Bumper System comes in many styles, so owners can customize the bumper. The storage ends are steel with a water tight seal and a lockable lid, and the seal and lid are designed to keep mud and water out and gear secure. They provide a place to stow recovery gear and other valuables.
Key features
- Lockable lid with a water tight seal
- Steel construction
- Textured black finish
- Bolts to XHD modular front bumpers
- Made for 2-door and 4-door models
- Front location, direct fit
- Aftermarket bumper type
- Rugged Ridge lists them for storing recovery gear
Keeping storage ends sealed
A sealed storage box on a bumper sees the same mud, spray and washing as the rest of the front end, so the seal is the part to watch. Dirt caught in the lid gasket can stop it closing tight and let water in. Wipe the gasket and sealing edges after muddy trips, and avoid high pressure washing directly at the lid hinges. Lubricate the lock cylinder lightly with a dry lubricant when it starts to feel stiff.
Load planning matters too. Heavy recovery gear, tow straps and tools shift when the vehicle bounces over rough ground, so store heavier items low and secure them with straps inside the compartment. Keep sharp items wrapped so they do not wear the seal. If a lid rattles or sits unevenly, check the hinge fasteners before driving further.
- Clean gasket and seal edges after muddy trips
- Check hinge fasteners if a lid sits unevenly
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 11540.22 (RUG11540.22) |
| UPC | 804314224554 |
| Product type | Bumper storage ends |
| Location | Front |
| Material | Steel |
| Finish | Textured black |
| Lid | Water tight, lockable |
| Bumper type | Aftermarket |
| Works with | XHD modular front bumpers |
| Models | 2-door and 4-door |
| Fit type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Rugged Ridge 11540.22 includes:
- 2007–2018 Jeep Wrangler (JK) (70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X)
The list covers the Wrangler JK only. It does not include the earlier TJ and YJ, the newer JL, or the Gladiator. The storage ends also need an XHD modular front bumper to mount to. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Tighten all bolts to the correct torque before use. Mount the ends to the XHD bumper before fitting the bumper if the steps allow, and make sure the lids open and lock fully.
Tighten the fasteners again after the first drives, and check that the lids, lock and seal operate freely. Keep packed loads within the bumper’s load limits when stowing recovery gear or other items.
What’s included
- XHD bumper storage ends with lockable lids
Not included: the XHD modular front bumper the ends bolt to.









