Select your vehicle

Bestop HighRock 4X4 2 Inch Approach and Departure Steel Roller in Black – 42905-01

Bestop

Shop Bestop Bumper Accessories on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Black 2 inch steel approach and departure roller, Bestop 42905-01
  • Named fit: Bestop HighRock 4×4 front bumper
  • Confirm mounting hardware against your installation before starting.

Description

Overview

The Bestop 42905-01 is a black 2 inch approach and departure steel roller made for the Bestop HighRock 4×4 front bumper. Bestop names that bumper as the fit, so match the roller to the HighRock 4×4 front bumper before ordering.

Steel construction and a black finish are the stated materials. Bestop also shows a photo for illustration only, so the image does not confirm mounting points.

Key features

  • 2 inch approach and departure roller
  • Steel construction
  • Black finish
  • Named fit: Bestop HighRock 4×4 front bumper

Before you install

Approach and departure rollers help a vehicle roll over the lip of a steep obstacle without the bumper catching. On a trail, the roller also takes some of the contact that would otherwise land on the lower bumper edge. Steel rollers hold up well to rock contact, but the finish can chip, so a light touch-up is a practical habit.

Before fitting, measure the clearance between the roller and the bumper’s lower edge and check that nothing blocks the mounting points, such as a winch plate or sensor bracket. After the first few trail runs, check the fasteners and welds for movement, and look for surface rust where the paint has worn.

  • Check bumper clearance at full steering lock
  • Re-check fasteners after the first trail runs
  • Touch up chips to slow surface rust

Specifications

Brand Bestop
Part number 42905-01
UPC 77848019082
Size 2 inch
Material Steel
Finish Black
Named fit Bestop HighRock 4×4 front bumper
Fitment label Universal fit

Vehicle fitment

It is made to fit the Bestop HighRock 4×4 front bumper. Confirm fit for your vehicle’s year, model and trim before ordering.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

The package is the 2 inch steel roller. Check the contents against your installation before starting.

SKU: BST42905-01 Category:

Specification

Shipping weight 16.40 lbs
Package dimensions 29.00 × 4.00 × 4.00 in
brands

Questions & Answers

What is the Bestop 42905-01?

It is a black 2 inch approach and departure steel roller, part number 42905-01, made by Bestop for the HighRock 4x4 front bumper. Confirm its dimensions against your bumper before installing.

Does this roller fit my vehicle?

Bestop names the HighRock 4x4 front bumper as the fit and gives no year or vehicle model. Check that your bumper is a HighRock 4x4 before ordering.

Does the package include mounting hardware?

Check the package contents against your installation before starting. Mounting needs depend on your bumper, so confirm them before ordering.

How do I care for a steel roller?

Wipe off mud and salt after trail use, then dry the steel. Touch up any chipped paint promptly to slow rust, and re-tighten fasteners after early trail runs.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Bestop Bumper Accessories on Amazon