Overview
The Fab Fours Ranch D-Ring Mount, part M1850-1, is an optional black steel bolt-on mount for a D-ring. The shackle is not included. It is offered in universal fit, so check the mounting point against your bumper before buying.
Key features
- Black steel construction
- Optional bolt-on design
- Universal fit.
- Shackle not included
Using a D-ring safely
A D-ring is only as strong as the mount and shackle that hold it, so every link in the recovery chain should be matched to the load. Pull straight on the shackle where possible, since side loading stresses the pin and mount. Keep recovery lines away from sharp edges and make sure the shackle pin is fully seated before any pull.
Inspect the mount after each recovery. Look for cracks around the bolt holes, bent steel or loose hardware, and tighten or replace parts before the next use. Bolt-on mounts also loosen with vibration, so check torque after the first few trail runs.
- Use a shackle rated for the expected load
- Pull straight on the shackle where possible
- Keep recovery lines clear of sharp edges
- Re-check bolts after rough trails
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | M1850-1 |
| UPC | 5810102135 |
| Material | Steel |
| Finish | Black |
| Mounting | Optional bolt-on |
Vehicle fitment
No vehicle years, makes or models are recorded for this mount. Fab Fours gives only a universal fit note.
Check the mounting point against your bumper before choosing this mount. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The mount bolts on, so confirm the bolt pattern and hardware match the bumper or mounting point you plan to use before installing.
What’s included
The mount itself is the product named.
Not included: the shackle.









