Overview
The LBM Bumper Mount, part number T1634CMB, is a bolt-on mount for LED lights in the factory front bumper opening of the 2016–2018 Toyota Tacoma. It holds up to 18 inches of LED light mounting and fits within the factory bumper opening.
The LBM line uses patent-pending Multi-Mount technology, which allows several configurations of LED lights up to the width of the bumper opening. The mounts are made in the USA and finished in textured matte black powder coat over an aluminum-assembled construction. They are designed to work with most LED light brands.
Key features
- Fits within the factory front bumper opening
- Up to 18 inches of LED light mounting capability
- Patent-pending Multi-Mount system for multiple light configurations
- Welded one-piece construction for strength
- No cutting or drilling required
Choosing LED lights for the bumper
The bumper opening is a fixed space, so the light layout matters as much as the light count. Measure the opening and plan the arrangement before you buy lights, keeping lenses clear of the grille and the hood edge. Matching light housings and wiring lengths help the setup look even, and a neat harness routed away from moving parts avoids chafing.
Off-road lights see vibration, water and dust, so mounting points should be checked after rough trips. Tighten the bolts, look for cracked powder coat and make sure the lights are still aimed correctly. Many drivers add a relay and switch for their lights, which reduces the load on the truck’s wiring and keeps the switch away from the dash.
- Measure the opening before choosing light sizes
- Keep wiring away from the fan and moving parts
- Re-aim lights after the first few trail trips
Specifications
| Brand | N-Fab |
|---|---|
| Model | LBM Bumper Mount |
| Part number | T1634CMB |
| UPC | 843206120291 |
| Position | Front bumper opening |
| Finish | Textured black powder coat |
| Light mounting capacity | Up to 18 inches |
| Construction | Aluminum-assembled, welded one-piece |
| Warranty | 5-year finish, lifetime craftsmanship |
| Made in | USA |
| Fitment type | Direct fit |
Vehicle fitment
It is for the 2016–2018 Toyota Tacoma.
The list does not include any other Tacoma model year or other Toyota models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The mounts bolt on to the factory hole locations in the front bumper, so no cutting or drilling is needed. The Multi-Mount system sets the light configuration within the bumper opening.
What’s included
The LBM bumper mount with its Multi-Mount system. Check the package contents against your installation before starting.









