Select your vehicle
-13%

Smittybilt Aluminum 2 Inch Drop Ball Mount (Satin) – 2932

Smittybilt

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • 6061 aluminum drop ball mount, hard anodized, satin finish
  • Class 4 rated: 8000 lb gross trailer weight, 800 lb tongue weight
  • 2 in drop with a 2 in by 2 in shank
  • 1 in ball hole
  • Model 2932, UPC 631410113167

Description

Overview

The Smittybilt 2 inch drop ball mount, model 2932, is a Class 4 rated hitch made from 6061 aluminum. Smittybilt hard anodizes it for weather resistance and finish retention, and forges it for strength.

Smittybilt rates the hitch at 8000 lb gross trailer weight and 800 lb tongue weight. The 2 inch drop places the ball lower than the shank. The shank is 2 inches by 2 inches, and the ball hole is 1 inch. The satin finish is listed alongside the hard anodized coating.

Key features

  • 6061 aluminum construction
  • Hard anodized for weather resistance and finish retention
  • Class 4 rating
  • 2 inch drop
  • Satin finish

Matching a hitch to your vehicle

A hitch mount is only as good as the receiver it bolts into and the vehicle’s towing setup. Before buying, check the receiver opening and the vehicle’s towing rating, since the trailer load has to stay within both. Aluminum mounts resist corrosion and weigh less than steel, which helps when the hitch is removed and stored, but a lighter mount does not raise the rating of the vehicle.

Hitch balls are sized to the coupler, so match the ball diameter and rating to your trailer rather than the mount. A drop mount changes the ball height, and the drop should be chosen so the trailer sits level when loaded. Check the hitch pin clip and pin fit each time before towing, and inspect the welds and the anodized finish for scratches that may let corrosion start.

  • Measure trailer height before choosing the drop
  • Check the hitch pin and clip before each trip
  • Keep the ball and pin secure in the mount

Specifications

Brand Smittybilt
Model number 2932
UPC 631410113167
Material 6061 aluminum
Finish Hard anodized, satin
Hitch class Class 4
Gross trailer weight 8000 lb
Tongue weight 800 lb
Drop 2 in
Shank size 2 in by 2 in
Ball hole 1 in
Shank hole 1 in

Vehicle fitment

Confirm fit for your vehicle’s year, model and trim before ordering. Check the receiver size and your vehicle’s towing rating before choosing this hitch, because a hitch must suit both.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

The 2 inch drop ball mount, model 2932.

Not included: a hitch ball and hitch pin, which are sold separately.

SKU: S/B2932 Category:

Specification

Shipping weight 5.00 lbs
Package dimensions 15.00 × 3.00 × 2.00 in
brands

Questions & Answers

What does the 2 inch drop do?

The drop lowers the ball 2 inches below the shank, which helps level a trailer. The mount is listed with a 2 inch drop and a 2 inch by 2 inch shank.

How much can it tow?

Smittybilt rates the mount Class 4, with an 8000 lb gross trailer weight and an 800 lb tongue weight. Stay within your vehicle's own towing rating as well.

Is this mount made of steel?

No. It is made from 6061 aluminum that is hard anodized for weather resistance and finish retention. The satin finish is listed with that coating.

Does it come with a ball?

No. A hitch ball and hitch pin are not part of this mount, so buy a ball and pin that match your trailer's coupler and the 1 inch ball hole.

How do I know if the hitch needs replacing?

Replace the mount if the welds crack, the shank bends, or the receiver fit is loose after the pin is seated. Anodized finish that has chipped or worn through can be touched up, but structural damage calls for replacing the mount.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon